Friction reduction mechanisms in boundary lubricated W-doped DLC coatings

被引：50

作者：

Yang, Liuquan ^{[1
]}

Neville, Anne ^{[1
]}

Brown, Alisdair ^{[2
]}

Ransom, Paul ^{[2
]}

Morina, Ardian ^{[1
]}

机构：

[1] Univ Leeds, Sch Mech Engn, Inst Engn Thermofluids Surfaces & Interfaces iETS, Leeds LS2 9JT, W Yorkshire, England

[2] Afton Chem Ltd, Bracknell RG12 2UW, Berks, England

来源：

TRIBOLOGY INTERNATIONAL | 2014年 / 70卷

关键词：

DLC coating; Friction reduction and wear; Tribochemistry; RAMAN-SPECTROSCOPY; CARBON; MOS2;

D O I：

10.1016/j.triboint.2013.09.020

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The applications of commercially available Diamond Like Carbon (DLC) coatings have seen a rapid increase whilst a lot of tribochemistry problems are not fully understood. This study looks into a tungsten doped hydrogenated DLC coating reciprocating against cast iron in model oils. Friction and wear of such system are then compared with steel. Raman spectroscopy is used extensively to understand the coating interactions with the lubricant/additives. Our results have demonstrated the way to characterize carbon coating structure in lubrication. It clarified that the chemical decomposition of MoDTC to MOS2 is the dominant process rather than the possible formation of WS2 in such system. It also enables application of in situ tribochemical aspects using Raman spectroscopy in ambient conditions. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：26 / 33

页数：8

共 50 条

[21] Friction and wear mechanisms in boundary lubricated oxy-nitrided treated samples
Khan, Thawhid
Tamura, Yukio
Yamamoto, Hiroshi
Morina, Ardian
Neville, Anne
WEAR, 2016, 368 : 101 - 115
[22] Friction reduction by texturing of DLC coatings sliding against steel under oil lubrication
Koskinen, Jari
Tapper, Unto
Andersson, Peter
Varjus, Simo
Kolehmainen, Jukka
Tervakangas, Sanna
Buss, Wolfgang
SURFACE & COATINGS TECHNOLOGY, 2010, 204 (23): : 3794 - 3797
[23] Triboelectrochemical friction control of W- and Ag-doped DLC coatings in water-glycol with ionic liquids as lubricant additives
Khanmohammadi, Hamid
Wijanarko, Wahyu
Cruz, Sandra
Evaristo, Manuel
Espallargas, Nuria
RSC ADVANCES, 2022, 12 (06) : 3573 - 3583
[24] Influence of W content on microstructural, mechanical and tribological properties of sulfurized W-doped diamond-like carbon coatings
Yue, Wen
Wang, Song
Fu, Zhiqiang
Gao, Xiaocheng
Yu, Xiang
Liu, Jiajun
SURFACE & COATINGS TECHNOLOGY, 2013, 218 : 47 - 56
[25] Effects of sliding velocity and ambient temperature on the friction and wear of a boundary-lubricated, multi-layered DLC coating
Kim, Dong-Wook
Kim, Kyung-Woong
WEAR, 2014, 315 (1-2) : 95 - 102
[26] Friction and wear characteristics of DLC coatings with different hydrogen content lubricated with several Mo-containing compounds and their related compounds
Masuko, Masabumi
Ono, Takuya
Aoki, Saiko
Suzuki, Akihito
Ito, Hirotaka
TRIBOLOGY INTERNATIONAL, 2015, 82 : 350 - 357
[27] A Review on Effects of Lubricant Formulations on Tribological Performance and Boundary Lubrication Mechanisms of Non-Doped DLC/DLC Contacts
Zahid, Rehan
Hassan, Masjuki Bin Haji
Varman, Mahendra
Mufti, Riaz Ahmad
Kalam, Md. Abul
Zulkifli, Nurin Wahidah Binti Mohd
Gulzar, Mubashir
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES, 2017, 42 (04) : 267 - 294
[28] Statistical model for predicting friction coefficient and wear of duplex CrN/DLC and nano-multilayer DLC-W coatings using ANOVA
Funsho Olaitan Kolawole
Shola Kolade Kolawole
Discover Materials, 4 (1):
[29] Effects of fragments on W-DLC films properties under boundary lubrication condition in the friction system
詹华
汪瑞军
李振东
徐天杨
王伟平
China Welding, 2018, 27 (02) : 31 - 38
[30] Ultrasonic characterization of mechanical properties of Cr- and W-doped diamond-like carbon hard coatings
Zhang, FF
Krishnaswamy, S
Fei, D
Rebinsky, DA
Feng, B
THIN SOLID FILMS, 2006, 503 (1-2) : 250 - 258

← 1 2 3 4 5 →