Characterization of cracks formed in large flat-on-flat fretting contact

被引：19

作者：

Juoksukangas, Janne ^{[1
]}

Nurmi, Verner ^{[1
]}

Hintikka, Jouko ^{[3
,5
]}

Vippola, Minnamari ^{[2
]}

Lehtovaara, Arto ^{[1
]}

Mantyla, Antti ^{[3
]}

Vaara, Joona ^{[3
]}

Frondelius, Tero ^{[3
,4
]}

机构：

[1] Tampere Univ, Fac Engn & Nat Sci, Mat Sci & Environm Engn, Tribol & Machine Elements, POB 589, Tampere 33014, Finland

[2] Tampere Univ, Fac Engn & Nat Sci, Mat Sci & Environm Engn, Mat Characterizat, POB 589, Tampere 33014, Finland

[3] R&D & Engn, POB 244, Vaasa 65101, Finland

[4] Univ Oulu, Erkki Koiso Kanttilan Katu 1, Oulu 90014, Finland

[5] Tampere Univ Technol, Lab Mat Sci, Tribol & Machine Elements, POB 589, Tampere 33101, Finland

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2019年 / 124卷

关键词：

Fretting fatigue; Damage; Crack formation; Cracks; Microscopy; FATIGUE BEHAVIOR; FRICTION; WEAR; INITIATION; DAMAGE; MECHANISM;

D O I：

10.1016/j.ijfatigue.2019.03.004

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Fretting fatigue may lead to severe damage in machines. Adhesive material transfer spots in millimeter scale have previously been observed on fretted surfaces, which have been related to cracking. In this study, fretting-induced cracks formed in a large annular flat-on-flat contact are characterized. Optical and scanning electron microscopy of the fretting scar cross-section samples of self-mated quenched and tempered steel specimens revealed severe cracking and deformed microstructure. Two major cracks typically formed around an adhesion spot, which propagated at an oblique angle, regardless of the test parameters used. Millimeter-scale cracks were observed already within a few thousand loading cycles.

引用

页码：361 / 370

页数：10

共 50 条

[41] Fretting Fatigue with Cylindrical-On-Flat Contact: Crack Nucleation, Crack Path and Fatigue Life
Noraphaiphipaksa, Nitikorn
Manonukul, Anchalee
Kanchanomai, Chaosuan
MATERIALS, 2017, 10 (02)
[42] Finite element simulation of fretting wear behaviors under the ball-on-flat contact configuration
Cai, Mingxin
Zhang, Po
Xiong, Qiwen
Cai, Zhaobing
Luo, Shiyuan
Gu, Le
Zeng, Liangcai
TRIBOLOGY INTERNATIONAL, 2023, 177
[43] SHEAR CRACKS AT EDGE OF A FLAT PUNCH
VOSTROV, VK
SOVIET APPLIED MECHANICS, 1983, 19 (07): : 638 - 642
[44] A Tribological Study of SU-8 Micro-Dot Patterns Printed on Si Surface in a Flat-on-Flat Reciprocating Sliding Test
Nam Beng Tay
Minn, Myo
Sinha, Sujeet K.
TRIBOLOGY LETTERS, 2011, 44 (02) : 167 - 176
[45] FRETTING WEAR BETWEEN A HOLLOW SPHERE AND FLAT SURFACE
Raeymaekers, Bail
Helm, Sebastian
Brunner, Ralf
Fanslau, Edmund B.
Talke, Frank E.
PROCEEDINGS OF THE ASME/STLE INTERNATIONAL JOINT TRIBOLOGY CONFERENCE - 2009, 2010, : 435 - 437
[46] CONTACT AND RUBBING OF FLAT SURFACES
ARCHARD, JF
JOURNAL OF APPLIED PHYSICS, 1953, 24 (08) : 981 - 988
[47] A Tribological Study of SU-8 Micro-Dot Patterns Printed on Si Surface in a Flat-on-Flat Reciprocating Sliding Test
Nam Beng Tay
Myo Minn
Sujeet K. Sinha
Tribology Letters, 2011, 44
[48] CONTACT OF NOMINALLY FLAT SURFACES
GREENWOOD, JA
WILLIAMSON, JB
PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1966, 295 (1442) : 300 - +
[49] Contact of a rotating wheel with a flat
Sackfield, A.
Dini, D.
Hills, D. A.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2007, 44 (10) : 3304 - 3316
[50] Large deflections of composite circular springs with extended flat contact surfaces
Tse, PC
Reid, SR
Lau, KJ
Wong, WH
COMPOSITE STRUCTURES, 2004, 63 (02) : 253 - 260

← 1 2 3 4 5 →