The variations of microstructures and hardness of titanium matrix composite (TiB + TiC)/Ti-6Al-4V after shot peening

被引：13

作者：

Xie, Lechun ^{[1
]}

Wang, Liqiang ^{[1
]}

Jiang, Chuanhai ^{[1
]}

Lu, Weijie ^{[1
]}

机构：

[1] Shanghai Jiao Tong Univ, Sch Mat Sci & Engn, State Key Lab Met Matrix Composites, Shanghai 200240, Peoples R China

来源：

SURFACE & COATINGS TECHNOLOGY | 2014年 / 244卷

关键词：

Shot peening; Microstructure; Hardness; Reinforcement; Nano-indentation; SURFACE-LAYER CHARACTERISTICS; IN-SITU; MECHANICAL-PROPERTIES; TI-6AL-4V/TIB COMPOSITES; ALLOY COMPOSITES; ELASTIC-MODULI; CASTING ROUTE; TIB; DEFORMATION; ALUMINUM;

D O I：

10.1016/j.surfcoat.2014.01.053

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

After shot peening (SP), the variations of microstructures and hardness of (TiB + TiC)/Ti-6Al-4V were investigated. The microstructures of the surface and cross-section were studied, and the results revealed that the convex and concave features appeared on the surface after SP. Based on the microstructures of cross-section, the micrograph showed the random inclination of reinforcements in the surface layer, which illuminated that the reinforcements were yielded to the random deformation of matrix during SP. The variations of hardness before and after SP were investigated via the nano-indentation method. The results indicated that the variations of hardness were caused by the different extent of deformation under surface. All results were discussed in detail. (c) 2014 Elsevier B.V. All rights reserved.

引用

页码：69 / 77

页数：9

共 50 条

[41] Microstructure and Corrosion Properties of Ti-6Al-4V alloy by Ultrasonic Shot Peening
Zhang, Conghui
Song, Wei
Li, Fengbo
Zhao, Xu
Wang, Yaomian
Xiao, Guizhi
INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2015, 10 (11): : 9167 - 9178
[42] Effect of ultrasonic shot peening on LCF behavior of the Ti-6Al-4V alloy
Kumar, Sanjeev
Chattopadhyay, K.
Singh, Vakil
JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 724 : 187 - 197
[43] Hot corrosion behaviour of Ti-6Al-4V modified by ultrasonic shot peening
Kumar, Sanjeev
Chattopadhyay, K.
Mahobia, G. S.
Singh, Vakil
MATERIALS & DESIGN, 2016, 110 : 196 - 206
[44] Surface nanostructuring of Ti-6Al-4V alloy through ultrasonic shot peening
Kumar, Sanjeev
Chattopadhyay, K.
Singh, S. R.
Singh, Vakil
INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2017, 11 (01) : 23 - 35
[45] Thermal Oxidation of the Ti-6Al-4V/TiC Titanium Composite Fabricated by Laser Metal Deposition
Sinyakova, E. A.
Martynov, S. A.
Buslovich, D. G.
PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY, 2020, 2310
[46] EDDY-CURRENT MEASUREMENT OF RESIDUAL-STRESSES INDUCED BY SHOT PEENING IN TITANIUM TI-6AL-4V
SCHOENIG, FC
SOULES, JA
CHANG, H
DICILLO, JJ
MATERIALS EVALUATION, 1995, 53 (01) : 22 - 26
[47] Surface microstructure characterization on shot peened (TiB + TiC)/Ti-6Al-4V by Rietveld whole pattern fitting method
Lechun Xie
Qiang Feng
Yan Wen
Liqiang Wang
Chuanhai Jiang
Weijie Lu
Journal of Materials Research, 2016, 31 : 2291 - 2301
[48] Surface microstructure characterization on shot peened (TiB + TiC)/Ti-6Al-4V by Rietveld whole pattern fitting method
Xie, Lechun
Feng, Qiang
Wen, Yan
Wang, Liqiang
Jiang, Chuanhai
Lu, Weijie
JOURNAL OF MATERIALS RESEARCH, 2016, 31 (15) : 2291 - 2301
[49] Hydrogen-induced modification of the interface between matrix and ceramic phase of (TiB + TiC)/Ti-6Al-4V
Jiang, Botao
Wang, Liang
Yan, Hui
Zhu, Guoqiang
Teng, Jiliang
Wang, Binbin
Luo, Liangshun
Chen, Ruirun
Su, Yanqing
Guo, Jingjie
COMPOSITES COMMUNICATIONS, 2023, 37
[50] Nanoindentation Characterization on Microhardness of Micron-Level TiC and TiB Reinforcements in in-situ Synthesized (TiC+TiB)/Ti-6Al-4V Composite
Wen, Yan
Guo, Tingting
Zhou, Yuangui
Bai, Huiping
Wang, Zhou
FRONTIERS IN MATERIALS, 2019, 6

← 1 2 3 4 5 →