The variations of microstructures and hardness of titanium matrix composite (TiB + TiC)/Ti-6Al-4V after shot peening

被引：13

作者：

Xie, Lechun ^{[1
]}

Wang, Liqiang ^{[1
]}

Jiang, Chuanhai ^{[1
]}

Lu, Weijie ^{[1
]}

机构：

[1] Shanghai Jiao Tong Univ, Sch Mat Sci & Engn, State Key Lab Met Matrix Composites, Shanghai 200240, Peoples R China

来源：

SURFACE & COATINGS TECHNOLOGY | 2014年 / 244卷

关键词：

Shot peening; Microstructure; Hardness; Reinforcement; Nano-indentation; SURFACE-LAYER CHARACTERISTICS; IN-SITU; MECHANICAL-PROPERTIES; TI-6AL-4V/TIB COMPOSITES; ALLOY COMPOSITES; ELASTIC-MODULI; CASTING ROUTE; TIB; DEFORMATION; ALUMINUM;

D O I：

10.1016/j.surfcoat.2014.01.053

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

After shot peening (SP), the variations of microstructures and hardness of (TiB + TiC)/Ti-6Al-4V were investigated. The microstructures of the surface and cross-section were studied, and the results revealed that the convex and concave features appeared on the surface after SP. Based on the microstructures of cross-section, the micrograph showed the random inclination of reinforcements in the surface layer, which illuminated that the reinforcements were yielded to the random deformation of matrix during SP. The variations of hardness before and after SP were investigated via the nano-indentation method. The results indicated that the variations of hardness were caused by the different extent of deformation under surface. All results were discussed in detail. (c) 2014 Elsevier B.V. All rights reserved.

引用

页码：69 / 77

页数：9

共 50 条

[1] Investigation on the residual stress and microstructure of (TiB + TiC)/Ti-6Al-4V composite after shot peening
Xie, Lechun
Jiang, Chuanhai
Lu, Weijie
Zhan, Ke
Chen, Yanhua
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (09): : 3423 - 3427
[2] The influence of shot peening on the surface properties of (TiB + TiC)/Ti-6Al-4V
Xie, Lechun
Jiang, Chuanhai
Lu, Weijie
APPLIED SURFACE SCIENCE, 2013, 280 : 981 - 988
[3] Effect of stress peening on surface layer characteristics of (TiB + TiC)/Ti-6Al-4V composite
Xie, Lechun
Jiang, Chuanhai
Lu, Weijie
Chen, Yanhua
Huang, Junjie
MATERIALS & DESIGN, 2012, 33 : 64 - 68
[4] Effect of reinforcements on rolling contact fatigue behaviors of titanium matrix composite (TiB + TiC)/Ti-6Al-4V
Xie, Lechun
Zhou, Qinghua
Jin, Xiaoqing
Wang, Zhanjiang
Jiang, Chuanhai
Lu, Weijie
Wang, Jiaxu
Wang, Q. Jane
INTERNATIONAL JOURNAL OF FATIGUE, 2014, 66 : 127 - 137
[5] MODELING OF SHOT-PEENING EFFECTS ON THE SURFACE PROPERTIES OF A (TiB + TiC)/Ti-6Al-4V COMPOSITE EMPLOYING ARTIFICIAL NEURAL NETWORKS
Maleki, Erfan
Zabihollah, Abolghassem
MATERIALI IN TEHNOLOGIJE, 2016, 50 (06): : 851 - 860
[6] Diffusion bonding of TiC or TiB reinforced Ti-6Al-4V matrix composites to conventional Ti-6Al-4V alloy
Prikhodko, Sergey, V
Savvakin, Dmytro G.
Markovsky, Pavlo E.
Stasuk, Olexander O.
Penney, James
Shirzadi, Amir A.
Davies, Peter D.
Davies, Helen M.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2020, 25 (06) : 518 - 524
[7] Effect of hydrogen on superplastic deformation of (TiB + TiC)/Ti-6Al-4V composite
Lu, Junqiang
Qin, Jining
Lu, Weijie
Chen, Yifei
Zhang, Di
Hou, Hongliang
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2009, 34 (19) : 8308 - 8314
[8] Superplasticity of coarse-grained (TiB + TiC)/Ti-6Al-4V composite
Lu, Junqiang
Qin, Jining
Chen, Yifei
Zhang, Zhiwei
Lu, Weijie
Zhang, Di
JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 490 (1-2) : 118 - 123
[9] Evaluation on dry sliding wear behavior of (TiB+TiC)/Ti-6Al-4V matrix composite
Yang Zi-Run
Huan Hai-Xiang
Cui-Feng Jiang
Wen-Min Li
Xue-Ran Liu
Sungki Lyu
International Journal of Precision Engineering and Manufacturing, 2017, 18 : 1139 - 1146
[10] Evaluation on dry sliding wear behavior of (TiB+TiC)/Ti-6Al-4V matrix composite
Yang, Zi-Run
Huan, Hai-Xiang
Jiang, Cui-Feng
Li, Wen-Min
Liu, Xue-Ran
Lyu, Sungki
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2017, 18 (08) : 1139 - 1146

← 1 2 3 4 5 →