High Strength Alumina Micro-Beams Fabricated by Inkjet Printing

被引：6
|
作者：
Philips, Noah R. [1 ]
Compton, Brett G. [2 ]
Begley, Matthew R. [1 ]
机构：
[1] Univ Calif Santa Barbara, Dept Mech Engn, Santa Barbara, CA 93106 USA
[2] Univ Calif Santa Barbara, Dept Mat, Santa Barbara, CA 93106 USA
来源：
JOURNAL OF THE AMERICAN CERAMIC SOCIETY | 2012年 / 95卷 / 10期
关键词：
CERAMICS; ZIRCONIA;
D O I：
10.1111/j.1551-2916.2012.05395.x
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Freestanding ceramic microbeams were fabricated by inkjet printing of aqueous colloidal suspensions (up to 23 similar to vol% alumina). Their high strength (920 similar to MPa in bending) and stiffness (E similar to similar to similar to 400 similar to GPa) is attributed to low porosity (void fraction 0.03) and a paucity of microstructural flaws. A range of ink compositions and beam thicknesses were printed using a commercial inkjet cartridge and isostatically compacted prior to firing.
引用
收藏
页码：3016 / 3018
页数：3
相关论文
共 50 条
  • [41] Nonlinear random vibrations of micro-beams with fractional viscoelastic core
    Loghman, Ehsan
    Bakhtiari-Nejad, Firooz
    Kamali, Ali E.
    Abbaszadeh, Mostafa
    PROBABILISTIC ENGINEERING MECHANICS, 2022, 69
  • [42] Nonlinear vibration and dynamic stability of dielectric sandwich micro-beams
    Chen, Jun
    Qu, Wenchao
    Ye, Chao
    Zhao, Zinan
    Wang, Huiming
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2024, 262
  • [43] Primary and secondary resonance analyses of clamped–clamped micro-beams
    D. Younesian
    M. Sadri
    E. Esmailzadeh
    Nonlinear Dynamics, 2014, 76 : 1867 - 1884
  • [44] The use of classical beam theory for micro-beams composed of polycrystals
    Beran, MJ
    INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 1998, 35 (19) : 2407 - 2412
  • [45] High-performance Kirkpatrick-Baez supermirrors for neutron milli- and micro-beams
    Ice, G. E.
    Hubbard, C. R.
    Larson, B. C.
    Pang, J. W. L.
    Budai, J. D.
    Spooner, S.
    Vogel, S. C.
    Rogge, R. B.
    Fox, J. H.
    Donaberger, R. L.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 437 (01): : 120 - 125
  • [46] Novel dew point hygrometer fabricated with inkjet printing technology
    Tarapata, Grzegorz
    Marzecki, Michal
    Selma, Rafal
    Paczesny, Daniel
    Jachowicz, Ryszard
    SENSORS AND ACTUATORS A-PHYSICAL, 2016, 247 : 641 - 646
  • [47] The study of light guide plate fabricated by inkjet printing technique
    Wang, Min-Wen
    Pang, Da-Chen
    Tseng, Yu-En
    Tseng, Chun-Chieh
    JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 2014, 45 (03) : 1049 - 1055
  • [48] Highly integrated and transparent circuits fabricated by embedded inkjet printing
    Science Foundation in China, 2016, (02) : 30 - 30
  • [49] An amperometric glucose biosensor prototype fabricated by thermal inkjet printing
    Setti, L
    Fraleoni-Morgera, A
    Ballarin, B
    Filippini, A
    Frascaro, D
    Piana, C
    BIOSENSORS & BIOELECTRONICS, 2005, 20 (10): : 2019 - 2026
  • [50] Novel dew point hygrometer fabricated with inkjet printing technology
    Tarapata, Grzegorz
    Marzecki, Michal
    Selma, Rafal
    Paczesny, Daniel
    Jachowicz, Ryszard
    EUROSENSORS 2015, 2015, 120 : 1099 - 1102
12345