Changes in physical and thermo-physical properties of sugarcane, palmyra-palm and date-palm juices at different concentration of sugar

被引:57
|
作者
Rao, P. V. K. Jagannadha [2 ]
Das, Madhusweta [1 ]
Das, S. K. [1 ]
机构
[1] Indian Inst Technol, Dept Agr & Food Engn, Kharagpur 721302, W Bengal, India
[2] Acharya NG Ranga Agr Univ, Dept Agr Engn, Coll Agr, Naira 532185, Andhra Pradesh, India
关键词
Jaggery; Sugarcane; Palmyra-palm; Date-palm; Palm juice; THERMOPHYSICAL PROPERTIES; GUAVA JUICE; TEMPERATURE; COLOR; VISCOSITY; DENSITY; CONDUCTIVITY; MODEL;
D O I
10.1016/j.jfoodeng.2008.07.024
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The process of making jaggery from three natural juices by boiling could be divided into three zones: rise in temperature to boiling (Zone I), slow rise in both boiling temperature and total soluble solids (TSS) (Zone II) followed by rapid rise in boiling temperature with concomitant increase in viscosity and TSS (Zone III). The juice samples in Zone III exhibited changes in boiling temperature, viscosity and TSS from 105 to 121 degrees C, 4.5 to 988 mPa s and 54.6 to 81.9 (% w/w) for sugarcane (Saccharum officinarum); from 104 to 120 degrees C, 41.6 to 559 mPa s and 46 to 81 (% w/w) for palmyra-palm (Borassus flabellifer L); and from 103 to 121 degrees C, 22.9 to 417 mPa s and 51 to 81 (% w/w) for date-palm (Phoenix sylvestris L). Colour change (Delta E/Delta(% w/w)) was rapid in Zone III. Difference in colour among these jaggery samples might be attributed to amount of reducing sugars present initially and respective changes in properties during juice concentration. (C) 2008 Elsevier Ltd. All rights reserved.
引用
收藏
页码:559 / 566
页数:8
相关论文
共 50 条
  • [31] INVESTIGATION OF MECHANICAL AND PHYSICAL PROPERTIES OF DATE PALM STEM FIBRE REINFORCED EPOXY COMPOSITES
    Kumar, S. Mathu
    Rejikumar, R.
    Anand, Mini Jose
    Shebu, M. Mohamed
    MATERIALI IN TEHNOLOGIJE, 2024, 58 (02): : 203 - 208
  • [32] Mechanical and physical properties of the date palm stem (Phoenix dactylifera L.) in Morocco
    Elkhal, M.
    Hakam, A.
    Ez-Zahraouy, H.
    Hader, A.
    Tanasehte, M.
    Ziani, M.
    EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2022, 80 (03) : 693 - 703
  • [33] Mechanical and physical properties of the date palm stem (Phoenix dactylifera L.) in Morocco
    M. Elkhal
    A. Hakam
    H. Ez-Zahraouy
    A. Hader
    M. Tanasehte
    M. Ziani
    European Journal of Wood and Wood Products, 2022, 80 : 693 - 703
  • [34] Changes in physical and chemical properties of palm olein during heating.
    Rady, AH
    Madkour, MA
    GRASAS Y ACEITES, 1995, 46 (4-5) : 270 - 275
  • [35] Degradation of physical properties of different elastomers upon exposure to palm biodiesel
    Haseeb, A. S. M. A.
    Jun, T. S.
    Fazal, M. A.
    Masjuki, H. H.
    ENERGY, 2011, 36 (03) : 1814 - 1819
  • [36] Changes in thermo-physical properties of Al-Si alloys during heating
    Iwasaki Y.
    Keikinzoku/Journal of Japan Institute of Light Metals, 2022, 72 (06): : 485 - 489
  • [37] Comparative Study of Physical Properties Based on Different Parts of Sugar Palm Fibre Reinforced Unsaturated Polyester Composites
    Sahari, J.
    Sapuan, S. M.
    Ismarrubie, Z. N.
    Rahman, M. Z. A.
    COMPOSITE SCIENCE AND TECHNOLOGY, PTS 1 AND 2, 2011, 471-472 : 455 - +
  • [38] Design and development of a test method for the measurement of thermo-physical properties of different materials
    Ahmed, Khan Z.
    Asif, Mohammad
    Faizan, Mohammad
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2024, 238 (05) : 2127 - 2138
  • [39] EFFECT OF SOLUBLE SOLIDS CONCENTRATION AND TEMPERATURE ON THERMO-PHYSICAL AND RHEOLOGICAL PROPERTIES OF MANGO PUREE
    Gundurao, Anuradha
    Ramaswamy, Hosahalli S.
    Ahmed, Jasim
    INTERNATIONAL JOURNAL OF FOOD PROPERTIES, 2011, 14 (05) : 1018 - 1036
  • [40] EXPERIMENTAL STUDY OF THE EFFECT OF NANOPARTICLE CONCENTRATION ON THERMO-PHYSICAL PROPERTIES OF MOLTEN SALT NANOFLUIDS
    Tiznobaik, Hani
    Shin, Donghyun
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2019, VOL 8, 2019,