Nanostructured Al90Fe5Nd5 alloy obtained by mechanical alloying

被引：0
|
作者：
Cardoso, KR
García-Escorial, A
Botta, WJ
Lieblich, M
机构：
[1] CSIC, Dept Met Phys, CENIM, Madrid 28040, Spain
[2] UNIVAP, BR-12244000 Sao Jose Dos Campos, SP, Brazil
[3] Univ Fed Sao Carlos, DEMa, Sao Carlos, SP, Brazil
来源：
KOVOVE MATERIALY-METALLIC MATERIALS | 2005年 / 43卷 / 06期
关键词：
nanostructures; mechanical alloying;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
After 80 h of milling the elemental powders, mechanical alloying of Al90Fe5Nd5 produces a nanostructured composite, which consists of nanocrystals of fcc-Al and some Al11Nd3 precipitates, embedded in an amorphous matrix. This composite ha's a Vickers hardness of 2.8 GPa and is thermally stable up to about 340 degrees C. Above this temperature it decomposes into Al11Nd3 and Al10Fe2Nd phases.
引用
收藏
页码：440 / 446
页数：7
相关论文
共 50 条
  • [1] Mechanical alloying of Al90Fe5Nd5•
    Cardoso, KR
    Escorial, AG
    Botta, WJ
    Lieblich, M
    TRENDS IN MECHANICAL ALLOYING, 2002, : 121 - 130
  • [2] Crystallisation of Al90Fe5Nd5 amorphous alloy
    Cardoso, KR
    Escorial, AG
    Botta, WJ
    Lieblich, M
    METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, ISMANAM-2000, 2001, 360-3 : 161 - 166
  • [3] Heat treatment of amorphous Al90Fe5Nd5 and Al88FeNi6Nd5 alloys
    Cardoso, KR
    Escorial, AG
    Botta, WJ
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 2000, 273 (1-3) : 266 - 270
  • [4] Extrusion of nanocomposite Al90Fe5Nd5 characterization of the consolidated powders and material
    Cardoso, KR
    Escorial, AG
    Lieblich, M
    Botta, WJ
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 344 (1-2): : 57 - 63
  • [5] Nanostructured bulk Al90Fe5Nd5 prepared by cold consolidation of gas atomised powder using severe plastic deformation
    Yavari, AR
    Botta, WJ
    Rodrigues, CAD
    Cardoso, C
    Valiev, RZ
    SCRIPTA MATERIALIA, 2002, 46 (10) : 711 - 716
  • [6] Nanostructured Al89Fe10Zr1 alloy obtained by mechanical alloying
    Fogagnolo, JB
    Rodrigues, CAD
    Borba, EC
    Kiminami, CS
    Bolfarini, C
    Botta, WJ
    ISMANAM 2003: METASTABLE, MECHANICALLY ALLOYED AND NANOCRYSTALLINE MATERIALS, 2004, 20-21 : 183 - 187
  • [7] Influence of the milling time on Mechanical and Magnetic properties of Cu90Co5Ni5 alloy obtained by Mechanical Alloying
    Lopez, Marta
    Gomez, M. Elena
    Reyes, David
    Ramam, K.
    Mangalaraja, R. V.
    Prieto, Pedro
    Jimenez, Jose
    MECHANICAL PROPERTIES OF SOLIDS XI, 2010, 423 : 119 - +
  • [8] Structural, microstructural and thermal properties of nanostructured Fe60Al35Sn5 alloy synthesized by mechanical alloying
    Wederni, Asma
    Lachheb, Rabeb
    Sunol, Joan Josep
    Saurina, Joan
    Escoda, Lluisa
    Khitouni, Mohamed
    MATERIALS CHARACTERIZATION, 2019, 148 : 272 - 279
  • [9] Nanostructured Fe3Al intermetallic obtained by mechanical alloying and thermal ageing
    Bonetti, E.
    Valdre, G.
    Enzo, S.
    Cocco, G.
    Soletta, I.
    Nanostructured Materials, 1993, 2 (04):
  • [10] Production and Characterization of Nanostructured Powders of Nd2Fe14B and Fe90Al10 by Mechanical Alloying
    Gomez Rodriguez, Alvaro Javier
    Oyola Lozano, Dagoberto
    Bustos Rodriguez, Humberto
    Rojas Martinez, Yebrail
    Perez Alcazar, German Antonio
    Zamora Alfonso, Ligia Edith
    Trujillo Hernandez, Juan Sebastian
    MOLECULES, 2022, 27 (21):
12345