Study of thermal fatigue life caused by dispersion of solder joint

被引：3
|
作者：
Takagi, Kanji [1 ,2 ]
Yu, Qiang [1 ]
Shibutani, Tadahiro [1 ]
Miyauchi, Hiroki [1 ]
Shiratori, Masaki [1 ]
Noro, Yukihiro [2 ]
机构：
[1] Yokohama Natl Univ, Hodogaya Ku, 79-5 Tokiwadai, Yokohama, Kanagawa 2408501, Japan
[2] Omron Corp, Okuma, Fukushima 4850802, Japan
来源：
2008 11TH IEEE INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS, VOLS 1-3 | 2008年
关键词：
D O I：
10.1109/ITHERM.2008.4544359
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The fatigue life considering dispersion of solder joints on chip resistor was investigated by experimental approach and analytical approach. The significant difference of crack propagation ratio was found each specimen by experimental approach. However, it is difficult to clarify the reasons of the difference for the fatigue life of solder joint quantitatively. So, the analytical approach that estimates not only initial crack but crack propagation using FEM and Manson-Coffin law and the linear cumulative-damage law was applied and it was found the fatigue life of minimum dimension of solder joint decreased 20% against typical dimension. The fatigue life of asymmetry solder joints on the sides of chip resistor decreased 64% against the fatigue life of symmetry solder joints. Furthermore, the effect of dispersion on CTE of PWB for the fatigue life of solder joint was estimated. The fatigue life of solder joint in maximum CTE decreased 30% as compared to the typical CTE. Finally, the effect of voids in solder joint on chip resistor was evaluated. When void occupancy is 13%, which is maximum void occupancy in specimens, the fatigue life of solder joint decreased 16%.
引用
收藏
页码：883 / +
页数：2
相关论文
共 50 条
  • [41] An exPerimental study of effect of solder joint geometry on thermal cycle life in SMT
    王国忠
    方鸿渊
    王春青
    钱乙余
    China Welding, 1997, (01) : 70 - 76
  • [42] Effects of package geometry on thermal fatigue life and microstructure of Sn-Ag-Cu solder joint
    Zeng, Z.
    Li, X. B.
    Li, L.
    Wang, Z. H.
    MATERIALS SCIENCE AND TECHNOLOGY, 2011, 27 (11) : 1686 - 1693
  • [43] Thermal fatigue life evaluation of lead-free solder joint of chip size package with underfill
    Tohei, Tomotake
    Shohji, Ikuo
    Yoshizawa, Keisuke
    Nishimoto, Masaharu
    Kawano, Takayuki
    Mizutani, Yumiko
    Ohsaki, Yoshihiko
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2008, 72 (03) : 244 - 248
  • [44] Comparison Investigation of Thermal Fatigue and Mechanical Fatigue Behavior of Board Level Solder Joint
    Lin, Jian
    Lei, Yongping
    Wu, Zhongwei
    Yin, LanLi
    2010 11TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY & HIGH DENSITY PACKAGING (ICEPT-HDP), 2010, : 1179 - 1182
  • [45] Process capability study and thermal fatigue life prediction of ceramic BGA solder joints
    Xie, DJ
    Wang, ZP
    FINITE ELEMENTS IN ANALYSIS AND DESIGN, 1998, 30 (1-2) : 31 - 45
  • [46] Study on Failure Simulation and Fatigue Life Prediction of BGA Solder Joint under Random Vibration
    Zhang, Yulin
    Jing, Bo
    Lu, Fang
    Jiao, Xiaoxuan
    Hu, Jiaxing
    Chen, Yaojun
    2018 PROGNOSTICS AND SYSTEM HEALTH MANAGEMENT CONFERENCE (PHM-CHONGQING 2018), 2018, : 675 - 681
  • [47] Effect of voids on thermal fatigue reliability of lead free solder joint
    Kim, Doseop
    Yu, Qiang
    Kobayashi, Yusuke
    Shibutani, Tadahiro
    Advances in Electronic Packaging 2005, Pts A-C, 2005, : 1643 - 1648
  • [48] Solder Joint Fatigue Analysis under Combined Thermal and Vibration Loading
    Meier, K.
    Roellig, M.
    Liu, Y.
    Bock, K.
    2017 IEEE 19TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC), 2017,
  • [49] FACTORS AFFECTING THERMAL FATIGUE LIFE OF LCCC SOLDER JOINTS
    KRINKE, TA
    PAI, DK
    WELDING JOURNAL, 1988, 67 (10) : 33 - 40
  • [50] Factors Affecting Thermal Fatigue Life of LCCC Solder Joints
    Krinke, T.A.
    Pai, D.K.
    Welding Journal (Miami, Fla), 1988, 67 (10): : 33 - 40
12345