Subcritical crack growth in Low Temperature Co-fired Ceramics under biaxial loading

被引:32
|
作者
Bermejo, R. [1 ]
Supancic, P. [1 ,2 ]
Krautgasser, C. [2 ]
Morrell, R. [1 ,3 ]
Danzer, R. [1 ,2 ]
机构
[1] Univ Leoben, Inst Struktur & Funkt Keram, A-8700 Leoben, Austria
[2] Mat Ctr Leoben, A-8700 Leoben, Austria
[3] Natl Phys Lab, Teddington TW11 0LW, Middx, England
关键词
Low Temperature Co-fired Ceramics; Environmentally assisted cracking; Fracture mechanics; Failure assessment; Lifetime prediction; 3 BALLS TEST; LIFETIME MEASUREMENTS; BRITTLE DISCS; STRENGTH; PROPAGATION; FRACTURE; WATER; TOUGHNESS; FLEXURE; GLASS;
D O I
10.1016/j.engfracmech.2012.12.004
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
The biaxial strength of Low Temperature Co-fired Ceramics was determined using the ballon-three-balls test in several environments (dry oil, air and water). Subcritical crack growth phenomenon was observed, activated by the prolonged presence of humidity at the specimen surface. Whereas high strength values were reached during high-rate testing in dry oil, up to a 50% lower strength was measured on specimens immersed in water tested for longer periods. Experiments in a relative dry environment have shown for the first time evidence of two different crack growth mechanisms in this material. A model has been implemented to interpret the experimental results. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:108 / 121
页数:14
相关论文
共 50 条
  • [1] Subcritical crack growth in multilayer Low Temperature Co-fired Ceramics designed with surface compressive stresses
    Krautgasser, Clemens
    Danzer, Robert
    Deluca, Marco
    Supancic, Peter
    Aldrian, Franz
    Bermejo, Raul
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2016, 36 (16) : 4095 - 4105
  • [2] Strength reliability of 3D low temperature co-fired multilayer ceramics under biaxial loading
    Bermejo, R.
    Supancic, P.
    Kraleva, I.
    Morrell, R.
    Danzer, R.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, 31 (05) : 745 - 753
  • [3] MEMs in low temperature co-fired ceramics
    Moll, AJ
    Plumlee, DG
    LOW TEMPERATURE ELECTRONICS AND LOW TEMPERATURE COFIRED CERAMIC BASED ELECTRONIC DEVICES, 2004, 2003 (27): : 290 - 300
  • [4] Low temperature co-fired ceramics (LTCC) microsystems
    Golonka, Leszek
    Bembnowicz, Pawel
    Jurkow, Dominik
    Malecha, Karol
    Roguszczak, Henryk
    Tadaszak, Rafal
    OPTICA APPLICATA, 2011, 41 (02) : 383 - 388
  • [5] Development of a novel low temperature co-fired ceramics system composed of two different co-firable low temperature co-fired ceramics materials
    Murata, Takaki
    Ohga, Satoshi
    Sugimoto, Yasutaka
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 2006, 45 (9B): : 7401 - 7404
  • [6] Development of a novel low temperature co-fired ceramics system composed of two different co-Firable low temperature co-fired ceramics materials
    Murata Manufacturing Co., Ltd., 10-1 Higashikotari 1-chome, Nagaokakyo, Kyoto 617-8555, Japan
    Jpn J Appl Phys Part 1 Regul Pap Short Note Rev Pap, 9 B (7401-7404):
  • [7] Subcritical crack growth in three engineering ceramics under biaxial conditions
    Rosa, LG
    Fernandes, JC
    Duarte, IA
    ECF 12: FRACTURE FROM DEFECTS, VOLS. I-III, 1998, : 509 - 514
  • [8] Circulator Integrated in Low Temperature Co-fired Ceramics Technology
    van Dijk, Raymond
    van der Bent, Gijs
    Ashari, Mohamed
    McKay, Mark
    2014 9TH EUROPEAN MICROWAVE INTEGRATED CIRCUIT CONFERENCE (EUMIC), 2014, : 600 - 603
  • [9] Densification and crystallization in crystallizable low temperature co-fired ceramics
    Steve Dai
    Journal of Materials Science, 2012, 47 : 4579 - 4584
  • [10] Fabrication of Electrochemical Sensor in Low Temperature Co-Fired Ceramics
    Stekovic, Michal
    Sandera, Josef
    PROCEEDINGS OF THE 2014 37TH INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY (ISSE) - ADVANCES IN ELECTRONIC SYSTEM INTEGRATION, 2014, : 81 - 86