Study on the Fabrication and Performance of Very Low Pressure Plasma Sprayed Porous Metal Supported Solid Oxide Fuel Cell

被引：6

作者：

Gao, Jiu-Tao ^{[1
]}

Wang, Yue-Peng ^{[1
]}

Li, Cheng-Xin ^{[1
]}

Zhang, Shan-Lin ^{[1
]}

Yang, Guan-Jun ^{[1
]}

Li, Chang-Jiu ^{[1
]}

机构：

[1] Xi An Jiao Tong Univ, Sch Mat Sci & Engn, State Key Lab Mech Behav Mat, Xian, Shaanxi, Peoples R China

来源：

SOLID OXIDE FUEL CELLS 15 (SOFC-XV) | 2017年 / 78卷 / 01期

基金：

中国国家自然科学基金;

关键词：

YSZ ELECTROLYTE; ANODE; SOFC; SYSTEM;

D O I：

10.1149/07801.2059ecst

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

Very low pressure plasma spraying (VLPPS) technology was utilized to deposit electrolyte on porous metal supported solid oxide fuel cells (MS-SOFCs). The cross section of plasma sprayed electrolyte was characterized by SEM. The impedance spectra of sprayed single cell was measured by electrochemical impedance spectroscopy at different operating temperatures. The gas permeability was analyzed, and the long-term stability of the cell was also investigated. The results show that the OCV of the cell stabilized between 1.05 V and 1.1 V at the temperature range of 550 similar to 750 degrees C. The maximum power density of the cell could be up to 1164 mW/cm(2) at 750 degrees C. The plasma sprayed MS-SOFCs shows good stability.

引用

页码：2059 / 2067

页数：9

共 50 条

[31] Fabrication and properties of anode-supported solid oxide fuel cell
Han, Min-Fang
Yin, Hui-Yan
Miao, Wen-Ting
Zhou, Su
SOLID STATE IONICS, 2008, 179 (27-32) : 1545 - 1548
[32] Facile fabrication of the robust and high performance metal-supported solid oxide fuel cell using a directly assembled approach
Wang, Menglong
Zhang, Zhen
Chai, Runyu
Xia, Changrong
MATERIALS TODAY ENERGY, 2025, 48
[33] Fabrication and performance of whole membrane-component micro solid oxide fuel cell on solid porous support
Gao, Hongbo
Zhang, Yaohui
Guo, Weimin
Liu, Jiang
2008, Chinese Ceramic Society (36):
[34] PERFORMANCE OF PRESSURIZED ANODE SUPPORTED SOLID OXIDE FUEL CELL
Royer, Nathanael
Hamilton, Ryan
Collins, Jeffrey
Drazin, John
McLarty, Dustin
PROCEEDINGS OF THE ASME 13TH INTERNATIONAL CONFERENCE ON ENERGY SUSTAINABILITY, 2019, 2019,
[35] Vacuum plasma sprayed protective layers for solid oxide fuel cell application
Schiller, G
Henne, R
Ruckdäschel, R
JOURNAL OF ADVANCED MATERIALS, 2000, 32 (01): : 3 - 8
[36] Electrochemical testing of suspension plasma sprayed solid oxide fuel cell electrolytes
Waldbillig, D.
Kesler, O.
JOURNAL OF POWER SOURCES, 2011, 196 (13) : 5423 - 5431
[37] Characterization of suspension plasma-sprayed solid oxide fuel cell electrodes
Marchand, O.
Bertrand, P.
Mougin, J.
Comminges, C.
Planche, M. -P.
Bertrand, G.
SURFACE & COATINGS TECHNOLOGY, 2010, 205 (04): : 993 - 998
[38] Fabrication and Performance of Anode-Supported Flat Tubular Solid Oxide Fuel Cell Unit Bundle
Lim, Tak-Hyoung
Kim, Gwan-Yeong
Park, Jae-Layng
Lee, Seung-Bok
Shin, Dong-Ryul
Song, Rak-Hyun
JOURNAL OF THE KOREAN ELECTROCHEMICAL SOCIETY, 2007, 10 (04): : 283 - 287
[39] Fabrication and Performance of Ceramic Anode-supported Solid Oxide Fuel Cells
Yang, Zhibin
Pang, Zhaohua
Zhu, Tenglong
Zheng, Ziwei
Han, Minfang
SOLID OXIDE FUEL CELLS 13 (SOFC-XIII), 2013, 57 (01): : 549 - 554
[40] Breakthrough in atmospheric plasma spraying of high-density composite electrolytes: Deposition behavior and performance of plasma-sprayed GDC-LSGM on porous metal-supported solid oxide fuel cells
Chen, Zi-yang
Zhang, Xin
Liang, Yan-neng
Babar, Zaheer Ud Din
Gao, Jiutao
Li, Wan-ming
Zhang, Shan-Lin
Li, Chang-jiu
Li, Cheng-xin
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2024, 72 : 614 - 625

← 1 2 3 4 5 →