Nozzle Spraying Model of Combustion Thermal Spray

被引：0
|
作者：
Guo, Wenliang [1 ]
Guo, Zheng [2 ]
机构：
[1] Taiyuan Univ Technol, Coll Mech Engn, Taiyuan 030024, Shanxi, Peoples R China
[2] HSBC Bank, Hong Kong, Peoples R China
来源：
ENGINEERING SOLUTIONS FOR MANUFACTURING PROCESSES, PTS 1-3 | 2013年 / 655-657卷
关键词：
nozzle spray model; combustion thermal spray jet; spreading angle;
D O I：
10.4028/www.scientific.net/AMR.655-657.211
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The flame used in combustion flame spraying is typical of a high-temperature free jet. The flow fields of free jets are multi-phase flows that couple the mass and heat transfer. The analytical and numerical solutions to turbulent flows are engineering approximations. This work uses Prandtle's mixing-length theory to describe the flame spreading of free combustion spray jet and uses nozzle spray model to describe the distribution of the powder particles sprayed from powder nozzle to the substrate surface. The nozzle geometry and the parameters determine the distribution of the powder particles. The nozzle spray model has the same physical meaning with the jet spreading angle. Experimental measurements were carried by a high-speed CCD camera.
引用
收藏
页码：211 / +
页数：2
相关论文
共 50 条
  • [31] Comparison of deposits of wires applied by welding, thermal spraying, and spray and fuse
    Polymet Corp., Cincinnati, OH, United States
    [J]. Weld J (Miami Fla), 2008, 8 (50-53):
  • [32] Thermal Swing Evaluation of Thermal Spray Coatings for Internal Combustion Engines
    Uczak de Goes, Wellington
    Markocsan, Nicolaie
    Gupta, Mohit
    [J]. COATINGS, 2022, 12 (06)
  • [33] Modeling and analysis of combustion assisted thermal spray processes
    Shamim, Tariq
    Xia, Chunmei
    Mohanty, Pravansu
    [J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2007, 46 (08) : 755 - 767
  • [34] Particle deposition on the convergent nozzle walls of thermal-spray guns
    Biller, Benedikt
    Bußmann, Alexander
    Messe, Olivier
    Giglmaier, Marcus
    Adami, Stefan
    Adams, Nikolaus A.
    [J]. Surface and Coatings Technology, 2024, 494
  • [35] A WANDERING SPRAY NOZZLE
    FRANCIS, JG
    [J]. BRITISH JOURNAL OF ANAESTHESIA, 1967, 39 (10) : 813 - &
  • [36] A WANDERING SPRAY NOZZLE
    FRANCIS, JG
    [J]. ANAESTHESIA, 1995, 50 (10) : 923 - 923
  • [37] SPRAY NOZZLE SELECTION
    SANTOLERI, JJ
    [J]. CHEMICAL ENGINEERING PROGRESS, 1974, 70 (09) : 84 - 88
  • [38] SPRAY DRIFT AND RECOVERY AS AFFECTED BY SPRAY THICKENER, NOZZLE TYPE, AND NOZZLE PRESSURE
    BODE, LE
    BUTLER, BJ
    GOERING, CE
    [J]. TRANSACTIONS OF THE ASAE, 1976, 19 (02): : 213 - 218
  • [39] A model for automotive windshield washer spray delivered by a fluidic nozzle
    Ghannam, M.
    Schumack, M.
    [J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 1996, 210 D4 (04) : 327 - 333
  • [40] A model for automotive windshield washer spray delivered by a fluidic nozzle
    Ghannam, M
    Schumack, M
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 1996, 210 (04) : 327 - 333
12345