Fast spectroscopic imaging using online optimal sparse k-space acquisition and projections onto convex sets reconstruction

Long acquisition times, low resolution, and voxel contamination are major difficulties in the application of magnetic resonance spectroscopic imaging (MRSI). To overcome these difficulties, an online-optimized acquisition of k-space, termed sequential forward array selection (SFAS), was developed to reduce acquisition time without sacrificing spatial resolution. A 2D proton MRSI region of interest (ROI) was defined from a scout image and used to create a region of support (ROS) image. The ROS was then used to optimize and obtain a subset of k-space (i.e., a subset of nonuniform phase encodings) and hence reduce the acquisition time for MRSI. Reconstruction and processing software was developed in-house to process and reconstruct MRSI using the projections onto convex sets method. Phantom and in vivo studies showed that good-quality MRS images are obtainable with an approximately 80% reduction of data acquisition time. The reduction of the acquisition time depends on the area ratio of ROS to FOV (i.e., the smaller the ratio, the greater the time reduction). It is also possible to obtain higher-resolution MRS images within a reasonable time using this approach. MRSI with a resolution of 64 x 64 is possible with the acquisition time of the same as 24 x 24 using the traditional full k-space method.