Analytical and computational studies on the vacuum performance of a chevron ejector

被引:3
|
作者
Kong, F. S. [1 ]
Jin, Y. Z. [2 ]
Kim, H. D. [1 ]
机构
[1] Andong Natl Univ, Sch Mech Engn, Andong 760749, South Korea
[2] Zhejiang Sci Tech Univ, Coll Mech Engn & Automat, Hangzhou 310018, Peoples R China
基金
新加坡国家研究基金会;
关键词
1D evaluation; Compressible flow; Chevron nozzle; Starting transient; Shock wave; Vacuum ejector-diffuser system; DRIVEN JET PUMP; 2ND-MOMENT CLOSURE; FLOW; TRANSIENTS; NOZZLE; MODEL;
D O I
10.1007/s00193-015-0618-8
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
The effects of chevrons on the performance of a supersonic vacuum ejector-diffuser system are investigated numerically and evaluated theoretically in this work. A three-dimensional geometrical domain is numerically solved using a fully implicit finite volume scheme based on the unsteady Reynolds stress model. A one-dimensional mathematical model provides a useful tool to reveal the steady flow physics inside the vacuum ejector-diffuser system. The effects of the chevron nozzle on the generation of recirculation regions and Reynolds stress behaviors are studied and compared with those of a conventional convergent nozzle. The present performance parameters obtained from the simulated results and the mathematical results are validated with existing experimental data and show good agreement. Primary results show that the duration of the transient period and the secondary chamber pressure at a dynamic equilibrium state depend strongly on the primary jet conditions, such as inlet pressure and primary nozzle shape. Complicated oscillatory flow, generated by the unsteady movement of recirculation, finally settles into a dynamic equilibrium state. As a vortex generator, the chevron demonstrated its strong entrainment capacity to accelerate the starting transient flows to a certain extent and reduce the dynamic equilibrium pressure of the secondary chamber significantly.
引用
收藏
页码:771 / 788
页数:18
相关论文
共 50 条
  • [21] Experimental and numerical studies on the performance of a precooled supersonic ejector
    Liang, Tao
    Li, Zhiyan
    Xu, Wanwu
    Zhang, Saiqiang
    Ye, Wei
    APPLIED THERMAL ENGINEERING, 2024, 253
  • [22] DEVELOPMENT OF ANALYTICAL MODEL FOR PREDICTING DUAL-PHASE EJECTOR PERFORMANCE
    Elmore, Emily
    Al-Mutairi, Khalid
    Hussain, Bilal
    Ei-Gizawy, A. Sherif
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 7, 2017,
  • [23] Comparison of the performance enhancement of vacuum ejector by means of structure optimization and bypass methods
    Niu, Leilei
    Zhang, Xiaobing
    ENERGY, 2024, 297
  • [24] A Study on Ejector Performance Characteristics by Ejector Geometry/Performance Variables
    Choi, Ji-Seon
    Yu, I-Sang
    Shin, Dong-Hae
    Lee, Hee-Jun
    Ko, Young-Sung
    JOURNAL OF THE KOREAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES, 2018, 46 (06) : 496 - 502
  • [25] Ejector Pump CFD Model Validation and Performance Improvement Studies
    Arun, B. H.
    Vyas, J.
    Gopalsamy, B. M.
    Chimmat, M.
    JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2018, 77 (06): : 353 - 358
  • [26] Analytical and Numerical Studies of a Steam Ejector on the Effect of Nozzle Exit Position and Suction Chamber Angle to Fluid Flow and System Performance
    Ramesh, A. S.
    Sekhar, S. Joseph
    JOURNAL OF APPLIED FLUID MECHANICS, 2017, 10 (01) : 369 - 378
  • [27] Computational analysis of a variable ejector flow
    H. D. Kim
    J. H. Lee
    T. Setoguchi
    S. Matsuo
    Journal of Thermal Science, 2006, 15
  • [28] Computational Analysis of a Variable Ejector Flow
    H.D. KIM
    J.H. LEE
    T. SETOGUCHI
    S.MATSUO
    Journal of Thermal Science, 2006, (02) : 140 - 144
  • [29] Computational study of ejector-pumps
    Timouchev, Serguei
    Alksenov, Andrey
    Bogdanov, Victor
    Karpyshev, Alexander
    Proceedings of the ASME Fluids Engineering Division Summer Conference - 2005, Vol 1, Pts A and B, 2005, : 1425 - 1430
  • [30] Computational Analysis of a Variable Ejector Flow
    Kim, H. D.
    Lee, J. H.
    Setoguchi, T.
    Matsuo, S.
    JOURNAL OF THERMAL SCIENCE, 2006, 15 (02) : 140 - 144