Fabrication and laser behaviors of Yb3+ doped silica large mode area photonic crystal fiber prepared by sol-gel method

被引：43

作者：

Wang, Shikai ^{[1
,2
]}

Li, Zhilan ^{[1
,2
]}

Yu, Chunlei ^{[1
]}

Wang, Meng ^{[1
]}

Feng, Suya ^{[1
]}

Zhou, Qinling ^{[1
]}

Chen, Danping ^{[1
]}

Hu, Lili ^{[1
]}

机构：

[1] Chinese Acad Sci, Shanghai Inst Opt & Fine Mech, Key Lab Mat High Power Laser, Shanghai 201800, Peoples R China

[2] Univ Chinese Acad Sci, Beijing 100039, Peoples R China

来源：

OPTICAL MATERIALS | 2013年 / 35卷 / 09期

关键词：

Ytterbium doped silica PCF; Large mode area; Sol-gel; Fiber laser; OPTICAL-PROPERTIES;

D O I：

10.1016/j.optmat.2013.05.029

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Yb3+, Al3+ co-doped silica large mode area photonic crystal fiber (LMA CF) has been prepared by sol-gel method combined with stack-capillary-draw technique. The core glass with composition of 0.3Yb(2)O(3)-3Al(2)O(3)-96.7SiO(2) (mol%) has 927 mu s fluorescence lifetime, 0.82 pm(2) stimulated emission cross section at similar to 1 mu m and 1.4 ppm residual hydroxyl group. 6.8 W continuous-wave fiber laser ranging from 1040 to 1070 nm has been obtained from a piece of 98-cm-long PCF with the Yb3+ concentration of 6.49 x 10(19) ions/cm(3) pumped by a commercial 927-nm laser diode. The laser has a threshold of 1.45 W launched power with a slope efficiency of 48%. The maximum output power of 6.8W is limited by the available pumping power, and the optical loss is 1.2 dB/m at 1053 nm. To the best of our knowledge, this is the highest laser output power report on Yb3+, Al3+ co-doped silica LMA PCF prepared by sol-gel method. Crown Copyright (C) 2013 Published by Elsevier B.V. All rights reserved.

引用

页码：1752 / 1755

页数：4

共 50 条

[41] FABRICATION OF F-DOPED SILICA GLASSES BY THE SOL-GEL METHOD.
Shibata, Shuichi
Kitagawa, Takeshi
Hanawa, Fumiaki
Horiguchi, Masaharu
1600, (25):
[42] Yb3+-doped large-mode-area photonic crystal fiber laser with 210 W continuous-wave output power
LI JianFeng1
2 State Key Laboratory of Transient Optics and Photonics
Science Bulletin, 2009, (20) : 3670 - 3673
[43] Yb3+-doped large-mode-area photonic crystal fiber laser with 210 W continuous-wave output power
Li JianFeng
Duan KaiLiang
Liu YongZhi
Dai ZhiYong
Ou ZhongHua
Liu Yong
CHINESE SCIENCE BULLETIN, 2009, 54 (20): : 3670 - 3673
[44] Structural, optical and luminescence features of Er3+/Yb3+ co-doped sol-gel silica glasses
Sulym, I. Ya
Veteska, P.
Klement, R.
Hadduchova, Z.
Lokaj, J.
Gatial, A.
Borysenko, M., V
Janek, M.
Gryn, D., V
Iakhnenko, M. S.
Naumenko, A. P.
FUNCTIONAL MATERIALS, 2021, 28 (01): : 14 - 21
[45] Single-polarization ultra-large-mode-area Yb-doped photonic crystal fiber
Schmidt, O.
Rothhardt, J.
Eidam, T.
Roeser, F.
Limpert, J.
Tuennermann, A.
Hansen, K. P.
Jakobsen, C.
Broeng, J.
OPTICS EXPRESS, 2008, 16 (06): : 3918 - 3923
[46] Waveguiding Er3+/Yb3+:LiNbO3 films prepared by a sol-gel method using polyvinylpyrrolidone
Rubesova, K.
Mikolasova, D.
Hlasek, T.
Jakes, V.
Nekvindova, P.
Bousa, D.
Oswald, J.
JOURNAL OF LUMINESCENCE, 2016, 176 : 260 - 265
[47] Photodarkening-resistance improvement of Yb3+/Al3+ co-doped silica fibers fabricated via sol-gel method
Xie, Fenghou
Shao, Chongyun
Wang, Meng
Zhou, Qinling
Lou, Fengguang
Xu, Wenbin
Yu, Chunlei
Feng, Suya
Hu, Lili
OPTICS EXPRESS, 2018, 26 (22): : 28506 - 28516
[48] Mode-locked Yb-doped large-mode-area photonic crystal fiber laser operating in the vicinity of zero cavity dispersion
Song, Y. -J
Hu, M. -L
Gu, C. -L.
Chai, L.
Wang, C. -Y
Zheltikov, A. M.
LASER PHYSICS LETTERS, 2010, 7 (03) : 230 - 235
[49] Phosphate Yb3+ photonic crystal fiber single-mode laser with enormous high pump absorption
Franczyk, M.
Stepien, R.
Pysz, D.
Kujawa, I.
Buczynski, R.
LASER PHYSICS LETTERS, 2014, 11 (08)
[50] Structural and optical properties of titania photonic crystal films prepared by a sol-gel method
Sinitskii, Alexander S.
Abramova, Vera V.
Tretyakov, Yuri D.
MENDELEEV COMMUNICATIONS, 2007, 17 (01) : 1 - 3

← 1 2 3 4 5 →