Bending under tension test with direct friction measurement

被引：38
|
作者：
Andreasen, JL [1 ]
Olsson, DD [1 ]
Chodnikiewicz, K [1 ]
Bay, N [1 ]
机构：
[1] Tech Univ Denmark, Dept Mfg Engn & Management, DK-2800 Lyngby, Denmark
来源：
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE | 2006年 / 220卷 / 01期
关键词：
sheet metal forming; tribology; lubricant testing;
D O I：
10.1243/095440505X32913
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A special bending-under-tension (BUT) transducer has been developed in which friction around the tool radius can be directly measured when drawing a plane sheet strip around a cylindrical tool pin under constant back tension. The front tension, back tension, and torque on the tool pin are all measured directly, thus enabling accurate measurement of friction and direct determination of lubricant film breakdown for varying normal pressure, sliding speed, tool radius, and tool preheat temperature. The transducer is applied in an experimental investigation focusing on limits of lubrication in drawing of stainless steel, showing the influence of varying process conditions and the performance of different lubricants.
引用
收藏
页码：73 / 80
页数：8
相关论文
共 50 条
  • [31] Stress concentration formulae useful for any shape of notch in a round test specimen under tension and under bending
    Noda, NA
    Takase, Y
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 1999, 22 (12) : 1071 - 1082
  • [32] Biaxial tension under bending and compression - development of a new formability test for incremental sheet forming
    Ai, S.
    Long, H.
    19TH INTERNATIONAL CONFERENCE ON METAL FORMING, MF 2022, 2022, 1270
  • [33] Finite Element Modelling of Material Deformation and Damage by Tension under Cyclic Bending and Compression Test
    Ai, Sheng
    Long, Hui
    PROCEEDINGS OF THE 22ND INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2019), 2019, 2113
  • [34] The Stabilizing Effect of Bending-Under-Tension
    Emmens, W. C.
    van den Boogaard, A. H.
    14TH INTERNATIONAL CONFERENCE ON MATERIAL FORMING ESAFORM, 2011 PROCEEDINGS, 2011, 1353 : 1583 - 1588
  • [35] Prediction of springback after bending under tension
    Yang, Yanfeng
    Chalal, Hocine
    Baudouin, Cyrille
    Vincze, Gabriela
    Balan, Tudor
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2022, 15 (03)
  • [36] Prediction of springback after bending under tension
    Yanfeng Yang
    Hocine Chalal
    Cyrille Baudouin
    Gabriela Vincze
    Tudor Balan
    International Journal of Material Forming, 2022, 15
  • [37] Plastic bending under tension of a wide sheet
    Zvorono, B.P.
    Soviet Forging and Sheet Metal Stamping Technology (English Translation of Kuznechno-Shtampovochnoe Proizvodstvo), 1988, (03): : 14 - 19
  • [38] ANALYSIS OF FERROCEMENT UNDER COMBINED TENSION AND BENDING
    RAJAGOPALAN, K
    JOURNAL OF FERROCEMENT-BANGKOK, 1977, 7 (01): : 1 - 8
  • [39] A correction to the analysis of bending under tension tests
    Nielsen, C. V.
    Legarth, B. N.
    Niordson, C. F.
    TRIBOLOGY INTERNATIONAL, 2022, 173
  • [40] Geometry and friction of helically wrapped wires in a cable subjected to tension and bending
    Kee-Jeung Hong
    Chongku Yi
    Young-ki Lee
    International Journal of Steel Structures, 2012, 12 : 233 - 242
12345