Effects of sintering atmosphere on microstructure and mechanical property of sintered powder metallurgy 316L stainless steel

被引：67
|
作者：
Kurgan, Naci [1 ]
机构：
[1] Karabuk Univ, Fac Engn, Dept Mech Engn, Karabuk, Turkey
来源：
MATERIALS & DESIGN | 2013年 / 52卷
关键词：
CORROSION BEHAVIOR; NITROGEN; DUPLEX; GAS;
D O I：
10.1016/j.matdes.2013.06.035
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, nitrogen and argon were used as the sintering atmosphere for AISI 316L stainless steel compacts. The effects of sintering atmosphere on sintered density, grain morphology and mechanical properties were investigated. The mechanical and microstructural characteristics of the sintered compacts were evaluated using optical microscopy, and scanning electron microscope. Tensile strength and hardness of the compacts sintered in nitrogen atmosphere are 290 MPa and 355.2 HV0.1, respectively. When argon was used as the sintering atmosphere, the tensile strength and hardness of the 316L stainless steel sintered compacts have become 226 MPa and 181.8 HV0.1 respectively. The results of this study indicate that the compacts sintered in nitrogen atmosphere exhibits higher strength and hardness than that of the steels sintered in argon atmosphere. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：995 / 998
页数：4
相关论文
共 50 条
  • [11] Microstructure and mechanical behavior of 316L liquid phase sintered stainless steel with boron addition
    Serafini, Francisco L.
    Peruzzo, Marcele
    Krindges, Israel
    Ordonez, Michell Felipe C.
    Rodrigues, Daniel
    Souza, Roberto M.
    Farias, Maria Cristina M.
    MATERIALS CHARACTERIZATION, 2019, 152 : 253 - 264
  • [12] Effects of Admixed Titanium on Densification of 316L Stainless Steel Powder during Sintering
    Aslam, Muhammad
    Ahmad, Faiz
    Yusoff, P. S. M. BintiMegat
    Muhamad, Norhamidi
    Raza, M. Rafi
    Shirazi, M. Irfan
    ICPER 2014 - 4TH INTERNATIONAL CONFERENCE ON PRODUCTION, ENERGY AND RELIABILITY, 2014, 13
  • [13] Study of vacuum tap sintering 316L stainless steel powder
    Zeng, Zhoushan
    Ge, Changchun
    Xia, Yuanluo
    Cailiao Kexue yu Gongyi/Material Science and Technology, 6 (02): : 45 - 47
  • [14] Effects of Sintering Temperature and Cooling Rate on Mechanical Properties of Powder Injection Molded 316L Stainless Steel
    Raza, Muhammad Rafi
    Ahmad, Faiz
    Mamat, Othman
    Omar, M. A.
    German, R. M.
    Muhsan, Ali S.
    ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS FOR PROTECTION, 2012, 185 : 102 - +
  • [15] Characterization of Boron Doped 316L Powder Metallurgy (PM) Stainless Steel
    Uzunsoy, Deniz
    Yeprem, H. Aygul
    MATERIALS TESTING, 2008, 50 (09) : 517 - 520
  • [16] Production of 316L Stainless Steel Used In Biomedical Applications By Powder Metallurgy
    Muratal, Onur
    Yamanoglu, Ridvan
    2019 SCIENTIFIC MEETING ON ELECTRICAL-ELECTRONICS & BIOMEDICAL ENGINEERING AND COMPUTER SCIENCE (EBBT), 2019,
  • [17] Semisolid State Sintering Behavior of Aluminum-Stainless Steel 316L Composite Materials by Powder Metallurgy
    Park, Kwangjae
    Kim, Dasom
    Kim, Kyungju
    Cho, Seungchan
    Takagi, Kenta
    Kwon, Hansang
    MATERIALS, 2019, 12 (09):
  • [18] Additive Manufacturing of 316L Stainless Steel by a Printing-Debinding-Sintering Method: Effects of Microstructure on Fatigue Property
    Jiang, Dayue
    Ning, Fuda
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2021, 143 (09):
  • [19] Effects of annealing treatment on microstructure and mechanical property of cold-drawn 316L stainless steel fibers
    Wang, Yan
    Yu, Haiou
    Liu, Yong
    Tang, Huiping
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 714 : 93 - 104
  • [20] Warm Compacting Behaviors and Sintering Performance of 316L Stainless Steel Powder
    Ke, Meiyuan
    MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4, 2012, 538-541 : 1088 - 1091
12345