Fabrication of third generation Al-Li alloy by friction stir welding: a review

被引：27

作者：

Alam, Md Parwez ^{[1
]}

Sinha, A. N. ^{[1
]}

机构：

[1] Natl Inst Technol Patna, Mech Engn Dept, Patna 800005, Bihar, India

来源：

SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES | 2019年 / 44卷 / 06期

关键词：

Friction stir welding; aluminium-lithium alloy; heat generation; mechanical properties; precipitates; FATIGUE-CRACK GROWTH; STRESS-CORROSION CRACKING; TOOL ROTATIONAL SPEED; MECHANICAL-PROPERTIES; MICROSTRUCTURAL EVOLUTION; RESIDUAL-STRESS; PRECIPITATE EVOLUTION; AGING RESPONSE; HEAT-TREATMENT; MG-AG;

D O I：

10.1007/s12046-019-1139-4

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Aerospace industry stimulates research for new materials to reduce the weight of it thereby reduction of fuel consumption. Aluminium-Lithium alloys have become a good alternative due to its inherent properties. Nevertheless, joining of these materials by traditional welding is difficult. Friction stir welding process considered as an ideal joining process for these materials due to low heat input. This paper reviews the fabrication of the latest generation of Al-Li alloy by friction stir welding. In addition, it also presents and discusses the effect of process parameters on microstructure, mechanical properties and precipitate distribution in friction stir welded joint of Al-Li alloy.

引用

页数：13

共 50 条

[31] Friction stir welding of Al-Mg-Li 1424 alloy
Sidhar, Harpreet
Martinez, Nelson Y.
Mishra, Rajiv S.
Silvanus, Juergen
MATERIALS & DESIGN, 2016, 106 : 146 - 152
[32] 2198 Al-Li plates joined by Friction Stir Welding: Mechanical and microstructural behavior
Cavaliere, P.
Cabibbo, M.
Panella, F.
Squillace, A.
MATERIALS & DESIGN, 2009, 30 (09) : 3622 - 3631
[33] The Correlation of Kissing Bond, Microstructure and Mechanical Properties of the 2195 Al-Li Alloy Friction Stir Welding Joints at Different Welding Speeds
Chen, Jiaxin
Liao, Hongfei
Chen, Rong
Tian, Ye
Zhang, Zhiqing
Liu, Shifeng
Song, Shoubo
METALS, 2023, 13 (08)
[34] A feasible operational parameter window for enhancement of welding speed in friction stir welding of 2195-T8 Al-Li alloy
Wang, Z. L.
Wang, B. B.
Zhang, Z.
Xue, P.
Liu, F. C.
Ni, D. R.
Xiao, B. L.
Ma, Z. Y.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2023, 28 (08) : 679 - 688
[35] Analysis of heat and mass transfer in ultrasonic vibration-enhanced friction stir welding of 2195 Al-Li alloy
Shi, L.
Chen, J.
Wu, C. S.
Fu, L.
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2021, 26 (05) : 363 - 370
[36] Effect of Friction Stir Welding Parameters on Mechanical Properties and Microstructure of AA2195 Al-Li Alloy Welds
Muthumanickam, Agilan
Gandham, Phanikumar
Dhenuvakonda, Sivakumar
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (06) : 1557 - 1561
[37] Effect of Trailing Intensive Cooling on Residual Stress and Welding Distortion of Friction Stir Welded 2060 Al-Li Alloy
Ji, Shude
Yang, Zhanpeng
Wen, Quan
Yue, Yumei
Zhang, Liguo
HIGH TEMPERATURE MATERIALS AND PROCESSES, 2018, 37 (05) : 397 - 403
[38] Effect of tool rotational speed on the microstructure and mechanical properties of bobbin tool friction stir welding of Al-Li alloy
Wang, F. F.
Li, W. Y.
Shen, J.
Hu, S. Y.
dos Santos, J. F.
MATERIALS & DESIGN, 2015, 86 : 933 - 940
[39] Microstructure and crack propagation behavior of 2195 Al-Li alloy with different orientations in the friction stir welding nugget zone
Song, Ke-jin
Wu, Yun-hua
Liang, Pei-chen
Fu, Xuesong
Hu, Zheng-gen
Chen, Guo-qing
Zhou, Wen-long
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2025, 920
[40] Investigation of stress corrosion cracking of friction stir welded 2060 Al-Li alloy
Yameen, Muhammad Usama
Hussain, Khawar
Afzal, Muhammad
Akhtar, Naveed
Farooq, Ameeq
WELDING IN THE WORLD, 2024, 68 (10) : 2723 - 2733

← 1 2 3 4 5 →