Mechanism of drag reduction for circular cylinders with patterned surface

In this paper, the flow over cylinders with a patterned surface (k/d = 1.98 x 10(-2)) is investigated in a subsonic wind tunnel over Reynolds numbers ranging from 3.14 x 10(4) to 2.77 x 10(5) by measuring drag, flow visualization and measuring velocity profiles above the surface of the cylinders, to observe the effect of hexagonal patterns on the flow of air. These patterns can also be referred as hexagonal dimples or bumps depending on their configuration. The investigations revealed that a patterned cylinder with patterns pressed outwards has a drag coefficient of about 0.65 times of a smooth one. Flow visualization techniques including surface oil-film technique and velocity profile measurement were employed to elucidate this effect, and hence present the mechanism of drag reduction. The measurement of velocity profiles using hot-wire anemometry above the surface reveal that a hexagonal bump cause local separation generating large turbulence intensity along the separating shear layer. Due to this increased turbulence, the flow reattaches to the surface with higher momentum and become able to withstand the pressure gradient delaying the main separation significantly. Besides that, the separation does not appear to occur in a straight line along the length of the cylinder as in case of most passive drag control methods, but follow exactly the hexagonal patterns forming a wave with its crest at 115 degrees and trough at 110 degrees, in contrast to the laminar separation line at 85 degrees for a smooth cylinder. (C) 2013 Elsevier Inc. All rights reserved.