Fabrication and consolidation of TiNx by pulsed electric current sintering

被引：1
|
作者：
Suarez-Vazquez, Santiago I. [1 ]
Nanko, Makoto [1 ]
机构：
[1] Nagaoka Univ Technol, Dept Mech Engn, 1603-1 Kamitomioka, Nagaoka, Niigata 9402188, Japan
来源：
ECO-MATERIALS PROCESSING AND DESIGN XIV | 2013年 / 761卷
关键词：
Titanium nitride; Pulsed electric current sintering; Grain growth; Densification; TITANIUM; TIN1-X;
D O I：
10.4028/www.scientific.net/MSF.761.55
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A new and simple method is proposed to fabricate fully dense and single fcc phase of substoichiometric titanium nitride (TiNx). Powders mixture composed of titanium hydride (TiH2) and titanium nitride (TiN) was consolidated by using pulsed electric current sintering. All samples showed relative density values higher than 98% with larger grain size at lower nitrogen concentration. Lattice parameter increased linearly with increasing [N]/[Ti] ratio. In addition, TiNx with substoichiometric compositions was more easily densified than stoichiometric TiN. The addition of TiH2 improves the sinterability of the samples preserving the fcc phase characteristic of TiN.
引用
收藏
页码：55 / +
页数：2
相关论文
共 50 条
  • [21] Rapid consolidation of nanostructured MoSi2 by pulsed current activated sintering
    Chae, Seung-Myoung
    Ko, In-Yong
    Nam, Kee-Seok
    Shon, In-Jin
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2010, 11 (04): : 503 - 507
  • [22] Properties and rapid consolidation of binderless nanostuctured NbC by pulsed current activated sintering
    Byung-Ryang Kim
    Min-Seok Moon
    Kee-Do Woo
    In-Jin Shon
    Electronic Materials Letters, 2009, 5 : 119 - 122
  • [23] Rapid consolidation of binderless nanocrystalline silicon carbide by pulsed current activated sintering
    Park, Na-Ra
    Ko, In-Yong
    Shon, In-Jin
    Hong, Kyung-Tae
    Doh, Jung-Mann
    Oh, Se-Hoon
    Yoon, Jin-Kook
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2011, 12 (05): : 534 - 537
  • [24] Properties and rapid consolidation of binderless titanium nitride by pulsed current activated sintering
    Kim, Wonbaek
    Park, Je-Shin
    Cho, Sung-Wook
    Kim, Na-Ri
    Ko, In-Yong
    Shon, In-Jin
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2010, 11 (05): : 627 - 630
  • [25] Properties and consolidation of nanostructured TiO2 by pulsed current activated sintering
    Shon, In-Jin
    Lee, Geon-Woo
    Doh, Jung-Mann
    Yoon, Jin-Kook
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2013, 14 (03): : 292 - 296
  • [26] Mechanical alloying of Ti-Nb-Si and their consolidation by pulsed current sintering
    Kobayashi, Keizo
    Matsumoto, Akihiro
    Nishio, Toshiyuki
    Ozaki, Kimihiro
    Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy, 2001, 48 (10): : 955 - 959
  • [27] Properties of nanostructured tungsten carbide and their rapid consolidation by pulsed current activated sintering
    Shon, In-Jin
    Kim, Byung-Ryang
    Doh, Jung-Mann
    Yoon, Jin-Kook
    Woo, Kee-Do
    PHYSICA SCRIPTA, 2010, T139
  • [28] Properties and Rapid Consolidation of Binderless Nanostuctured NbC by Pulsed Current Activated Sintering
    Kim, Byung-Ryang
    Moon, Min-Seok
    Woo, Kee-Do
    Shon, In-Jin
    ELECTRONIC MATERIALS LETTERS, 2009, 5 (03) : 119 - 122
  • [29] Effects of on/off pulse pattern on sintering alumina by a pulsed electric current sintering process
    Dang, Khanh Quoc
    Nanko, Makoto
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2009, 10 : S32 - S38
  • [30] Simultaneous synthesis and consolidation of W-added ZrB2 by pulsed electric current pressure sintering and their mechanical properties
    Hirota, Ken
    Endo, Takaya
    Kato, Masaki
    Nakane, Shingo
    Nishimura, Toshiyuki
    Morisada, Yoshiaki
    Mizuuchi, Kiyoshi
    PRICM 6: SIXTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, PTS 1-3, 2007, 561-565 : 527 - +
12345