Investigation into failure of laminated composite T-piece specimens under bending loading

被引：35

作者：

Helenon, F. ^{[1
,2
]}

Wisnom, M. R. ^{[1
]}

Hallett, S. R. ^{[1
]}

Trask, R. S. ^{[1
]}

机构：

[1] Univ Bristol, Adv Composites Ctr Innovat & Sci, Bristol BS8 1TR, Avon, England

[2] Natl Composites Ctr, Bristol BS16 7FS, Avon, England

来源：

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2013年 / 54卷

关键词：

Finite element analysis (FEA); Polymer-matrix composites; Stress concentrations; Fracture; SPAR WINGSKIN JOINTS; FINITE-ELEMENT; PR520; RESIN; DELAMINATION; STRESSES; BEHAVIOR; FLEXURE; DESIGN; CRACK;

D O I：

10.1016/j.compositesa.2013.07.015

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents an experimental and numerical investigation into failure of T-shaped laminated composite structures. Three out-of-plane bending cases with loads at angles of 0 degrees, 45 degrees and 90 degrees are studied. It is found that very high free-edge maximum principal transverse tensile stresses perpendicular to the fibre direction occur at the failure locations. The use of the "High Stress Concentration method" demonstrates that these are responsible for the specimens' failure. It is also demonstrated that this tool is very useful for stress engineers who mainly rely on linear elastic analyses to design complex laminated composite components. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：182 / 189

页数：8

共 50 条

[31] Investigation on interlaminar shear stresses in laminated composite plates under thermal and mechanical loading
Murugesan, Nagaraj
Rajamohan, Vasudevan
DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 451 - 455
[32] Investigation on interlaminar shear stresses in laminated composite beam under thermal and mechanical loading
Murugesan, Nagaraj
Rajamohan, Vasudevan
STEEL AND COMPOSITE STRUCTURES, 2015, 18 (03): : 583 - 601
[33] Numerical and experimental investigation into failure of T700/bismaleimide composite T-joints under tensile loading
Wu, Hai
Xiao, Jiayu
Xing, Suli
Wen, Siwei
Yang, Fubiao
Yang, Jinshui
COMPOSITE STRUCTURES, 2015, 130 : 63 - 74
[34] Progressive failure and ultimate collapse of laminated composite plates in bending
Padhi, GS
Shenoi, RA
Moy, SSJ
Hawkins, GL
COMPOSITE STRUCTURES, 1997, 40 (3-4) : 277 - 291
[35] Failure Behavior of SiCf/SiC T-Pieces Specimens under Bending Load
Li X.
Li L.
Shao H.-Y.
Yu G.-Q.
Gao X.-G.
Chen G.-F.
Zhang C.-L.
Tuijin Jishu/Journal of Propulsion Technology, 2023, 44 (08):
[36] Failure of the lumbar pedicles under bending loading
Arregui-Dalmases, Carlos
Ash, Joseph H.
Del Pozo, Eduardo
Kerrigan, Jason R.
Crandall, Jeff
Biomedical Sciences Instrumentation, 2010, 46
[37] Investigation on the precursors to the failure of composite samples under unixial loading condition
Zhao, Y. X.
Jiang, Y. D.
Zhu, J.
ROCK MECHANICS IN CIVIL AND ENVIRONMENTAL ENGINEERING, 2010, : 87 - 90
[38] Investigation into the failure of aircraft stringer–skin composite structure under bending load
Zhao H.Y.
Hu Y.L.
Fan J.C.
Yu Y.
Aerosp. Syst., 2023, 3 (417-425): : 417 - 425
[39] Failure prediction for laminated composites under multiaxial loading
Ardiç, ES
Anlas, G
Eraslanoglu, G
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 1999, 18 (02) : 138 - 150
[40] Stochastic nonlinear bending response of laminated composite plates with system randomness under lateral pressure and thermal loading
Lal, Achchhe
Singh, B. N.
Kumar, Rajesh
ARCHIVE OF APPLIED MECHANICS, 2011, 81 (06) : 727 - 743

← 1 2 3 4 5 →