Modeling aspects of flow and solute transport simulations in water disinfection tanks

Water disinfection tanks such as chlorine and ozone contactors typically consist of multiple compartments featuring a serpentine flow pattern. Due to the complex hydrodynamics, the design and optimization of these tanks are often carried out by employing computational fluid dynamics (CFD) simulations. The present study demonstrates the influence of certain modeling aspects when the widely used Reynolds-Averaged Navier Stokes (RANS) based CFD approach to predict hydrodynamics and disinfection performance is employed. Three different contact tank geometries are examined numerically using RANS. The time-averaged velocity predictions are reasonably accurate when compared to validation data. However, in baffled contact tanks, the time-averaged flow differs quite significantly from the instantaneous flow, with the consequence that RANS-based models require careful calibration of the turbulent mixing parameter, i.e., the turbulent Schmidt number, when computing transport of solutes. (C) 2013 Elsevier Inc. All rights reserved.