Performance Testing of Loop Heat Pipes with Vapor Chamber in the Evaporator

被引：0

作者：

Wang, Chin-Shu ^{[1
]}

Wang, Ying-Chih ^{[1
]}

Lee, Shah-Rong ^{[2
]}

机构：

[1] Natl Taipei Univ Technol, Coll Mech & Elect Engn, Taipei, Taiwan

[2] Technol & Sci Inst No Taiwan, Dept Mech Engn, Taipei, Taiwan

来源：

JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS | 2009年 / 30卷 / 05期

关键词：

loop heat pipes (LHP); vapor chamber (VC); evaporator; CAPABILITY;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This work develops a loop heat pipes (LHP) with the advantages of long distance (2050 mm) transport capability and high heat removal capacity (up to NOW). The evaporator of LHP is constructed by vapor chamber (VC) and compensation chamber (CC), which is separated by a 3 mm-thick sinter layer The experiment incorporates five parameters, including as vapor channel layout, orientation, filling ratio (F.R.), wick material and heat capacity. The study results demonstrate that flow resistance is successfully used to design the vapor channel layout. The LHP has better thermal performance in the verticality, and the optimal F.R. is 80%. A wick material with low thermal conductivity prevents the residual heat to leak into the CC, and hence the boiling efficiency and thermal cycle is enhanced. The minimum thermal resistance of LHP with radial channel layout is 0.212 degrees C/W when the heat load is 200W. Therefore, the equilibrium between boiling and condensation established at 200W.

引用

页码：419 / 424

页数：6

共 50 条

[21] Effects of the evaporator and condenser length on the performance of pulsating heat pipes
Wang, Jiansheng
Ma, He
Zhu, Qiang
APPLIED THERMAL ENGINEERING, 2015, 91 : 1018 - 1025
[22] Thermal Potential of Flat Evaporator Miniature Loop Heat Pipes for Notebook Cooling
Singh, Randeep
Akbarzadeh, Aliakbar
Mochizuki, Masataka
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2010, 33 (01): : 32 - 45
[23] Investigation of Geometric Factors of Convex Platforms in the Flat Evaporator of Loop Heat Pipes
Ge Zhang
Wenshuai Miao
Li Liu
Yingying Hong
Jiao Bai
Journal of Harbin Institute of Technology(New series), 2017, (06) : 90 - 96
[24] Investigation of Geometric Factors of Convex Platforms in the Flat Evaporator of Loop Heat Pipes
Ge Zhang
Wenshuai Miao
Li Liu
Yingying Hong
Jiao Bai
Journal of Harbin Institute of Technology, 2017, 24 (06) : 90 - 96
[25] An Experimental Study of Heat Transfer Characteristics in Miniature Loop Heat Pipes with Rectangular Shaped Evaporator
Lin, Z. R.
Lee, Z. Y.
Zhang, L. W.
Wang, S. F.
Merrikh, A. A.
Refai-Ahmed, G.
PROCEEDINGS OF THE ASME PACIFIC RIM TECHNICAL CONFERENCE AND EXHIBITION ON PACKAGING AND INTEGRATION OF ELECTRONIC AND PHOTONIC SYSTEMS, MEMS AND NEMS 2011, VOL 2, 2012, : 19 - +
[26] PERFORMANCE OF A FLEXIBLE EVAPORATOR FOR LOOP HEAT PIPE APPLICATIONS
Limaye, Mukta S.
Klausner, James F.
HT2008: PROCEEDINGS OF THE ASME SUMMER HEAT TRANSFER CONFERENCE - 2008, VOL 2, 2009, : 353 - 361
[27] Optimization design of grooved evaporator wick structures in vapor chamber heat spreaders
Li, Baotong
Yin, Xinxin
Tang, Wenhao
Zhang, Jinhua
APPLIED THERMAL ENGINEERING, 2020, 166
[28] Visualization study on the heat and mass transfer in the evaporator-compensation chamber of a loop heat pipe
Zhang, Qidong
Lin, Guiping
Shen, Xiaobin
Bai, Lizhan
Wen, Dongsheng
APPLIED THERMAL ENGINEERING, 2020, 164 (164)
[29] Recent Advances in Loop Heat Pipes with Flat Evaporator (vol 23, 1374, 2021)
Szymanski, Pawel
Law, Richard
McGlen, Ryan J.
Reay, David A.
ENTROPY, 2022, 24 (02)
[30] Design optimization of loop heat pipes with cylindrical evaporator and integral reservoir for space application
Vlassov, Valen V.
de Sousa, Fabiano L.
Riehl, Roger R.
SPACE TECHNOLOGY AND APPLICATIONS INTERNATIONAL FORUM STAIF 2008, 2008, 969 : 138 - 145

← 1 2 3 4 5 →