The Research of Low-Oxygen Control and Oxygen Behavior during RH Process in Silicon-Deoxidization Bearing Steel

被引：15
|
作者：
Xiao, Wei [1 ]
Wang, Min [1 ]
Bao, Yanping [1 ]
机构：
[1] Univ Sci & Technol Beijing, State Key Lab Adv Met, Beijing 100083, Peoples R China
来源：
METALS | 2019年 / 9卷 / 08期
关键词：
RH process; bearing steel; deoxidization; T.O content; LOW-CARBON STEEL; INCLUSIONS;
D O I：
10.3390/met9080812
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The variation of total oxygen (T.O) content, characterization of inclusions, slag composition, and off-gas behavior during the smelting process of silicon-deoxidization bearing steel were investigated with industrial experiments. The change of content of combined oxygen during RH (Ruhrstahl-Hereaeus vacuum degassing furnace) process was calculated and compared with T.O content change. It is found that the decrease of oxygen content is mainly caused by the removal of dissolved oxygen rather than the removal of oxides during RH process. Carbon was found to be a strong deoxidizer (stronger than aluminum) in high vacuum degree. Top slag is an oxygen source of the deoxidization process, leading to the re-oxidization of liquid steel, even though the FeO content is low in top slag. During the RH process, the change of oxygen mainly exists in three processes: 1) Deoxidization reaction in vacuum chamber, 2) oxygen mass transfer process between liquid steel out from a vacuum chamber and in ladle, and 3) oxygen mass transfer between ladle slag and liquid steel. It depends mainly on the mass transfer of the oxygen in the liquid steel.
引用
收藏
页数：15
相关论文
共 34 条
  • [1] Refining process with low vacuum or without vacuum for low-oxygen bearing steel
    Wang, Ping
    Ma, Tingwen
    Zhang, Jian
    Yi, Jisong
    Liu, Jianxin
    [J]. Kang T'ieh/Iron and Steel (Peking), 1995, 30 (02): : 19 - 22
  • [2] Control and behavior study on oxygen during electroslag remelting of bearing steel
    Beijing Univ of Science and, Technology, Beijing, China
    [J]. Kang T'ieh, 3 (13-17):
  • [3] Study on Control Technology of Slag Composition for Low-Sulfur and Low-Oxygen Steel
    ZHANG Min
    [J]. Journal of Iron and Steel Research(International), 2011, 18 (S2) : 195 - 200
  • [4] Study on Control Technology of Slag Composition for Low-Sulfur and Low-Oxygen Steel
    Zhang Min
    Zeng Jian-hua
    Pan Hong
    [J]. JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2011, 18 : 195 - 200
  • [5] Study on Control Technology of Slag Composition for Low-Sulfur and Low-Oxygen Steel
    ZHANG Min ZENG Jianhua PAN Hong PanGang Group Research Institute Co Ltd Chengdu Sichuan China
    [J]. Journal of Iron and Steel Research(International), 2011, 18(S2) (International) : 195 - 200
  • [6] Chinese scholars have made progress in the research of low-oxygen rare earth steel
    [J]. China Rare Earth Information, 2022, 28 (04) : 27 - 27
  • [7] TENSILE CREEP-BEHAVIOR OF A SILICON CARBIDE-BASED FIBER WITH A LOW-OXYGEN CONTENT
    BODET, R
    BOURRAT, X
    LAMON, J
    NASLAIN, R
    [J]. JOURNAL OF MATERIALS SCIENCE, 1995, 30 (03) : 661 - 677
  • [8] Study on total oxygen content and micro inclusion of bearing steel GCr15 during RH vacuum process
    Wu, Hua-Jie
    Bao, Yan-Ping
    Yue, Feng
    Tian, Xin-Zhong
    Xue, Zheng-Xue
    Ai, Xin-Gang
    Jia, Nan
    [J]. Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2009, 31 (SUPPL. 1): : 121 - 124
  • [9] Low-oxygen silicon preparation using vacuum treatment by oxidation control and moisture removal kinetics investigation
    Han, Shifeng
    Yang, Shicong
    Wei, Kuixian
    Ma, Wenhui
    Zhang, Jianqiang
    [J]. Vacuum, 2024, 227
  • [10] Mathematical model for the forced oxygen blowing decarburization process of ultra-low carbon steel during RH treatment
    Yuan, Baohui
    He, Yang
    Liu, Jianhua
    Zhou, Hailong
    Huang, Jihong
    [J]. METALLURGICAL RESEARCH & TECHNOLOGY, 2022, 119 (04)
1234