DETERMINATION OF OPTIMAL BALL BURNISHING PARAMETERS FOR SURFACE HARDNESS

被引：0
|
作者：
Sagbas, Aysun [1 ]
Kahraman, Funda [1 ]
机构：
[1] Mersin Univ, Tarsus Tech Educ Fac, Dept Mech Educ, TR-33400 Tarsus Mersin, Turkey
来源：
MATERIALI IN TEHNOLOGIJE | 2009年 / 43卷 / 05期
关键词：
Ball burnishing; surface hardness; Taguchi technique; factorial design; ANOVA; ROUGHNESS; FINISH;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The objective of this study is to improve surface hardness of 7178 aluminum alloy using the ball burnishing process. The effect of the main burnishing parameters on the objective function was examined using full factorial design and analysis of variance (ANOVA). The main parameters were found as burnishing force, feed rate and number of passes among four controllable factors that influence the surface hardness in ball burnishing process. Optimal ball burnishing parameters were determined after the experiments of the Taguchi's L9 orthogonal array. As result, the optimal burnishing parameters for surface hardness were the combination of the burnishing force at 200 N, number of passes at 4, feed rate at 0.25 mm/r.
引用
收藏
页码：271 / 274
页数：4
相关论文
共 50 条
  • [41] INVESTIGATIONS ON THE SURFACE-ROUGHNESS PRODUCED BY BALL BURNISHING
    LOH, NH
    TAM, SC
    MIYAZAWA, S
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1991, 31 (01): : 75 - 81
  • [42] Effect of Burnishing Parameters on Surface Finish
    Shirsat U.
    Ahuja B.
    Dhuttargaon M.
    Journal of The Institution of Engineers (India): Series C, 2017, 98 (4) : 431 - 436
  • [43] DETERMINATION OF HARDNESS FROM BALL INDENTATION
    STEPANOV, SS
    INDUSTRIAL LABORATORY, 1960, 26 (10): : 1324 - 1325
  • [44] Influence of ball-burnishing on roughness, hardness and corrosion resistance of AISI 1045 steel
    Saldana-Robles, Alberto
    Plascencia-Mora, Hector
    Aguilera-Gomez, Eduardo
    Saldana-Robles, Adriana
    Marquez-Herrera, Alfredo
    Angel Diosdado-De la Pena, Jose
    SURFACE & COATINGS TECHNOLOGY, 2018, 339 : 191 - 198
  • [45] Effect of internal roller burnishing on surface roughness and surface hardness of mild steel
    Babu, P. Ravindra
    Prasad, T. Siva
    Raju, A. V. S.
    Babu, A. Jawahar
    JOURNAL OF SCIENTIFIC & INDUSTRIAL RESEARCH, 2009, 68 (01): : 29 - 31
  • [46] The Influence of the Burnishing Process on the Change in Surface Hardness, Selected Surface Roughness Parameters and the Material Ratio of the Welded Joint of Aluminum Tubes
    Labuda, Wojciech
    Wieczorska, Agata
    Charchalis, Adam
    MATERIALS, 2024, 17 (01)
  • [47] Experimental investigation of effect of roller burnishing process parameters on surface roughness and surface hardness of C40E steel
    Kumar N.
    Sachdeva A.
    Singh L.P.
    Tripathi H.
    Kumar, Naresh (naresh.kumar888@yahoo.in), 2016, Inderscience Enterprises Ltd., 29, route de Pre-Bois, Case Postale 856, CH-1215 Geneva 15, CH-1215, Switzerland (18) : 185 - 199
  • [48] Determination of Optimal Working Parameters of the Combined Burnishing - Turning Process by Applying the Method of Response Surfaces
    Chirita, Bogdan
    Brabie, Gheorghe
    Mustea, Gheorghe
    ENGINEERING SOLUTIONS AND TECHNOLOGIES IN MANUFACTURING, 2014, 657 : 98 - 102
  • [49] Some surface characteristics due to center rest ball burnishing
    El-Axir, MH
    Ibrahim, AA
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 167 (01) : 47 - 53
  • [50] Surface improvement of shafts by the deep ball-burnishing technique
    Rodriguez, A.
    Lopez de Lacalle, L. N.
    Celaya, A.
    Lamikiz, A.
    Albizuri, J.
    SURFACE & COATINGS TECHNOLOGY, 2012, 206 (11-12): : 2817 - 2824
12345