Properties of hot extruded Al Sic metal matrix composites

被引：0
|
作者：
Sustarsic, B
Dobersek, M
Breskvar, B
Torkar, M
Kevorkijan, V
Smolej, A
Nardin, V
Dai, S
机构：
[1] Inst Met & Technol, Ljubljana, Slovenia
[2] Univ Ljubljana, Fac Nat Sci & Engn, Ljubljana, Slovenia
[3] Impol, Ljubljana, Slovenia
来源：
METALURGIJA | 1999年 / 38卷 / 03期
关键词：
DC cast Al SiC MMCs; extrusion; heat treatment; microstructure; mechanical properties;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The Duralcan's DC cast Al/SiC composite F3S.20S which is particularly suited for casting was investigated. The extrudability, as well as the microstructural features and the mechanical properties of the cast, extruded and heat treated composite are presented and discussed. The results show an essential improvement of the mechanical properties of the DC as cast composite after hot extrusion and heat treatment. The established mechanical properties of the composite show a targe potential for use. Wear resistance of extrusion dies, as well as poor machinability of this material limit the extended application of this or similar types of materials.
引用
收藏
页码：143 / 149
页数：7
相关论文
共 50 条
  • [1] Properties of Al/SiC metal matrix composites
    Sahin, Mumin
    Guler, Can
    Misirli, Cenk
    Cetinarslan, Cem S.
    Eisazadeh, Hamid
    [J]. MATERIALS TESTING, 2018, 60 (06) : 647 - 652
  • [2] Mechanical Properties of Al2O3 Reinforced Cast and Hot Extruded Al based Metal Matrix Composites
    Ghanaraja, S.
    Kumar, Vinuth
    Ravikumar, K. S.
    Madhusudan, B. M.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2017, 4 (02) : 2771 - 2776
  • [3] Production and mechanical properties of Al-SiC metal matrix composites
    Karvanis, K.
    Fasnakis, D.
    Maropoulos, A.
    Papanikolaou, S.
    [J]. 20TH INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY CONFERENCE (IMANEE 2016), 2016, 161
  • [4] EFFECT OF PARTICLE LOADING ON THE PROPERTIES ON Al/SiC METAL MATRIX COMPOSITES
    Givens, Brian
    Waggoner, W. Michael
    Kremer, Ken
    Aghajanian, Michael K.
    [J]. ALUMINUM ALLOYS: FABRICATION, CHARACTERIZATION AND APPLICATIONS II, 2009, : 197 - 201
  • [5] Development and Mechanical Properties of SiC Reinforced Cast and Extruded Al Based Metal Matrix Composite
    Mohanakumara, K. C.
    Rajashekar, H.
    Ghanaraja, S.
    Ajitprasad, S. L.
    [J]. INTERNATIONAL CONFERENCE ON ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING (ICAMME 2014), 2014, 5 : 934 - 943
  • [6] Effect of matrix/reinforcement particle size ratio (PSR) on the mechanical properties of extruded Al–SiC composites
    A. Fathy
    A. Sadoun
    M. Abdelhameed
    [J]. The International Journal of Advanced Manufacturing Technology, 2014, 73 : 1049 - 1056
  • [7] Development of Al-SiC Metal Matrix Composites by using Hot Press Forming Technologies
    Jeon, Ho-Jin
    Kim, Tae-Won
    [J]. COMPOSITES RESEARCH, 2007, 20 (04): : 9 - 17
  • [8] CORROSION BEHAVIOR OF SIC AL METAL MATRIX COMPOSITES
    TRZASKOMA, PP
    MCCAFFERTY, E
    CROWE, CR
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1983, 130 (09) : 1804 - 1809
  • [9] Experimental study of surface integrity of Al/SiC particulate metal matrix composites in hot machining
    Dabade, U. A.
    Jadhav, M. R.
    [J]. RESEARCH AND INNOVATION IN MANUFACTURING: KEY ENABLING TECHNOLOGIES FOR THE FACTORIES OF THE FUTURE - PROCEEDINGS OF THE 48TH CIRP CONFERENCE ON MANUFACTURING SYSTEMS, 2016, 41 : 914 - 919
  • [10] SEGREGATION TO SIC/AL INTERFACES IN AL BASED METAL MATRIX COMPOSITES
    STRANGWOOD, M
    HIPPSLEY, CA
    LEWANDOWSKI, JJ
    [J]. SCRIPTA METALLURGICA ET MATERIALIA, 1990, 24 (08): : 1483 - 1487
12345