Dimensional Stability of Poplar Wood after Densification Combined with Heat Treatment

被引：6
|
作者：
Jiabin Cai [1 ]
Tao Ding [1 ]
Liu Yang [1 ]
机构：
[1] Nanjing Forestry Univ, Fac Wood Sci & Technol, Nanjing 210037, Jiangsu, Peoples R China
来源：
MECHANICAL ENGINEERING AND MATERIALS, PTS 1-3 | 2012年 / 152-154卷
关键词：
poplar wood; densification; heat treatment; dimensional stability; BEHAVIOR;
D O I：
10.4028/www.scientific.net/AMM.152-154.112
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Hybrid poplar boards were subjected to thermo-mechanical densification combined with heat treatment. Hydroscopicity and hygroscopicity of the treated samples were measured. The results showed that dimensional stability of the samples was influenced by compression set significantly. The higher the compression set, the greater the swelling of the samples. On the contrary, the influence of densification temperature and duration was not significant. Thermal modification significantly reduced hydroscopicity and hygroscopicity of the samples. Both higher treatment temperature and longer holding time resulted in better dimensional stability.
引用
收藏
页码：112 / 116
页数：5
相关论文
共 50 条
  • [31] Improving dimensional stability of Populus cathayana wood by suberin monomers with heat treatment
    Zhang, Runhua
    Ma, Erni
    IFOREST-BIOGEOSCIENCES AND FORESTRY, 2021, 14 : 313 - 319
  • [32] Oil uptake by wood during heat-treatment and post-treatment cooling, and effects on wood dimensional stability
    Dubey, Manoj Kumar
    Pang, Shusheng
    Walker, John
    EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2012, 70 (1-3) : 183 - 190
  • [33] Evaluation of the Dimensional Stability of Black Poplar Wood Modified Thermally in Nitrogen Atmosphere
    Bytner, Olga
    Laskowska, Agnieszka
    Drozdzek, Michal
    Kozakiewicz, Pawel
    Zawadzki, Janusz
    MATERIALS, 2021, 14 (06)
  • [34] Effects of Acid Copper Chromate Preservative and Hydrothermal Treatment on the Dimensional Stability, Hardness, and Decay Resistance of Poplar Wood
    Hadi, Sina
    Hosseinihashemi, Seyyed Khalil
    Latibari, Ahmad Jahan
    Salem, Mohamed Z. M.
    BIORESOURCES, 2016, 11 (02): : 4850 - 4864
  • [35] MOISTURE ABSORPTION AND DIMENSIONAL STABILITY OF POPLAR WOOD IMPREGNATED WITH SUCROSE AND SODIUM CHLORIDE
    Petr, Paril
    Ales, Dejmal
    MADERAS-CIENCIA Y TECNOLOGIA, 2014, 16 (03): : 299 - 311
  • [36] Effect of heat treatment duration on the thermal conductivity of spruce and poplar wood
    Pasztory, Zoltan
    Horvath, Norbert
    Borcsok, Zoltan
    EUROPEAN JOURNAL OF WOOD AND WOOD PRODUCTS, 2017, 75 (05) : 843 - 845
  • [37] Effect of heat treatment duration on the thermal conductivity of spruce and poplar wood
    Zoltán Pásztory
    Norbert Horváth
    Zoltán Börcsök
    European Journal of Wood and Wood Products, 2017, 75 : 843 - 845
  • [38] Effect of heat treatment on the dimensional stability of ash (Fraxinus angustifolia Vahl.) wood
    Sahin, Halil Ibrahim
    Guler, Cengiz
    FORESTIST, 2018, 68 (01) : 42 - 52
  • [39] Effects of impregnation combined heat treatment on the pyrolysis behavior of poplar wood (vol 15, e0229907, 2020)
    Cai, Chenyang
    Cai, Jiabin
    PLOS ONE, 2020, 15 (07):
  • [40] Synergistic effect of tung oil and heat treatment on surface characteristics and dimensional stability of wood
    He, Luxi
    Zhang, Tianfang
    Zhao, Xiangyu
    Zhao, Yuxin
    Xu, Kai
    He, Zhengbin
    Yi, Songlin
    COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2023, 665
12345