PLA/PEG/MWCNT composites with improved processability and mechanical properties

被引：8
|
作者：
Wang, Shiwei [1 ]
Wu, Ruguang [1 ]
Zhang, Jianming [1 ]
Leng, Yuting [2 ]
Li, Qian [1 ]
机构：
[1] Zhengzhou Univ, Natl Ctr Int Joint Res Micronano Molding Technol, Sch Mech & Safety Engn, Zhengzhou, Peoples R China
[2] Zhengzhou Univ, Coll Chem, Green Catalysis Ctr, Key Lab Chem Biol & Organ Chem Henan Prov, Zhengzhou, Peoples R China
来源：
POLYMER-PLASTICS TECHNOLOGY AND MATERIALS | 2021年 / 60卷 / 04期
基金：
中国国家自然科学基金;
关键词：
Polymer; composites; processability; mechanical properties;
D O I：
10.1080/25740881.2020.1811324
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
A medical microneedle candidate material is prepared bases on polylactic acid (PLA), poly(ethylene glycol) (PEG), and low content of multi-walled carbon nanotubes (MWCNT) composites. A successive self-nucleation and annealing analysis was applied and the presence of PEG and the MWCNT ratio had a significant influence on the processability of PLA. The composites show much better tensile strength and elongation at break than pure PLA. Based on the good processability and the balance of high strength and superior toughness, the polymer composites can be potential material for medical microneedle.
引用
收藏
页码：430 / 439
页数：10
相关论文
共 50 条
  • [21] Effect of diameter of MWCNT reinforcements on the mechanical properties of cement composites
    Zaheer, Mohd Moonis
    Jafri, Mohd Shamsuddin
    Sharma, Ravi
    ADVANCES IN CONCRETE CONSTRUCTION, 2019, 8 (03) : 207 - 215
  • [22] Mechanical Properties of Continuously Reinforced MWCNT Polymer Composites in Compression
    Li, Yupeng
    Suhr, Jongwhan
    BEHAVIOR AND MECHANICS OF MULTIFUNCTIONAL MATERIALS AND COMPOSITES 2012, 2012, 8342
  • [23] Alumina-MWCNT composites: microstructural characterization and mechanical properties
    Sharma, Nidhi
    Syed, Alam Nasimul
    Ray, Bankim Chandra
    Yadav, Surekha
    Biswas, Krishanu
    JOURNAL OF ASIAN CERAMIC SOCIETIES, 2019, 7 (01) : 1 - 19
  • [24] Tribology and Mechanical Properties of Carbon Fabric/MWCNT/Epoxy Composites
    Shivamurthy, B.
    Murthy, Krishna
    Anandhan, S.
    ADVANCES IN TRIBOLOGY, 2018, 2018
  • [25] Study of Nano Mechanical Properties Polydimethylsiloxane (PDMS) /MWCNT Composites
    Murudkar, Vrishali
    Gaonkar, Amita
    Deshpande, V. D.
    Mhaske, S. T.
    2ND INTERNATIONAL CONFERENCE ON CONDENSED MATTER AND APPLIED PHYSICS (ICC-2017), 2018, 1953
  • [26] NEW PEROXIDE CURABLE FLUOROELASTOMERS WITH IMPROVED MECHANICAL-PROPERTIES AND PROCESSABILITY
    ARCELLA, V
    FERRO, R
    ALBANO, M
    MINUTILLO, A
    KAUTSCHUK GUMMI KUNSTSTOFFE, 1991, 44 (09): : 833 - 837
  • [27] Biodegradable PLA/TPU blends with improved mechanical properties
    Zhang, Lan
    Ye, Zhicheng
    Hou, Pengliang
    MATERIALS LETTERS, 2025, 387
  • [28] Via precise interface engineering towards bioinspired composites with improved 3D printing processability and mechanical properties
    Hansske, Felix
    Bas, Onur
    Vaquette, Cedryck
    Hochleitner, Gernot
    Groll, Juergen
    Kemnitz, Erhard
    Hutmacher, Dietmar W.
    Boerner, Hans G.
    JOURNAL OF MATERIALS CHEMISTRY B, 2017, 5 (25) : 5037 - 5047
  • [29] Polylactide (PLA) and Highly Filled PLA - Calcium Sulfate Composites with improved Impact Properties
    Murariu, M.
    Ferreira, A. Da Silva
    Duquesne, E.
    Bonnaud, L.
    Dubois, Ph.
    MACROMOLECULAR SYMPOSIA, 2008, 272 : 1 - 12
  • [30] PLA/ESO/MWCNT nanocomposite: a study on mechanical, thermal and electroactive shape memory properties
    Raghunath, Surya
    Kumar, Sudheer
    Samal, Sushanta K.
    Mohanty, Smita
    Nayak, Sanjay K.
    JOURNAL OF POLYMER RESEARCH, 2018, 25 (05)
12345