Experimental investigations on steel shear walls as seismic retrofit measure for existing rc-buildings

被引：0
|
作者：
Guendel, M. [1 ]
Schmitt, D. [1 ]
Hoffmeister, B. [1 ]
机构：
[1] Rhein Westfal TH Aachen, Inst Steel Struct, Aachen, Germany
来源：
COST ACTION C26: URBAN HABITAT CONSTRUCTIONS UNDER CATASTROPHIC EVENTS | 2010年
关键词：
D O I：
暂无
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
Within a collaborative research project founded by the European Commission steel solutions for seismic upgrading and retrofitting were analyzed. In this paper design, preparation and test results of cyclic tests on steel shear walls are presented. The test program comprised of one pure RC-frame as reference test, two pure steel shear walls and one RC-frame retrofitted by a steel shear wall. The plates of the shear wall with thickness of 4 mm and 1 mm were either welded or fixed by powder actuated fasteners at the boundary elements.
引用
收藏
页码：865 / 870
页数：6
相关论文
共 50 条
  • [21] Seismic strengthening of existing reinforced concrete buildings by providing shear walls
    Structural Eng. Dept., Faculty of Eng., Alexandria University, Alexandria, Egypt
    [J]. AEJ Alexandria Eng J, 2008, 1 (41-62):
  • [22] Seismic retrofit of existing SRC frames using rocking walls and steel dampers
    Wada A.
    Qu Z.
    Motoyui S.
    Sakata H.
    [J]. Frontiers of Architecture and Civil Engineering in China, 2011, 5 (3): : 259 - 266
  • [23] Design of diagrid exoskeletons for the retrofit of existing RC buildings
    Labo, Simone
    Passoni, Chiara
    Marini, Alessandra
    Belleri, Andrea
    [J]. ENGINEERING STRUCTURES, 2020, 220 (220)
  • [24] Seismic assessment of existing RC buildings
    Fardis, MN
    Panagiotakos, TB
    Biskinis, D
    Kosmopoulos, A
    [J]. SEISMIC ASSESSMENT AND REHABILITATION OF EXISTING BUILDINGS, 2003, 29 : 215 - 244
  • [25] Pin-supported walls as seismic retrofit for existing RC frames: feasibility and preliminary design
    Elena Casprini
    Andrea Belleri
    Alessandra Marini
    Simone Labò
    Chiara Passoni
    [J]. Bulletin of Earthquake Engineering, 2022, 20 : 5349 - 5381
  • [26] Experimental and numerical investigations on seismic behavior of stiffened corrugated steel plate shear walls
    Tong, Jingzhong
    Wu, Ruomin
    Wang, Lingqi
    [J]. EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 2023, 52 (12): : 3551 - 3574
  • [27] Pin-supported walls as seismic retrofit for existing RC frames: feasibility and preliminary design
    Casprini, Elena
    Belleri, Andrea
    Marini, Alessandra
    Labo, Simone
    Passoni, Chiara
    [J]. BULLETIN OF EARTHQUAKE ENGINEERING, 2022, 20 (10) : 5349 - 5381
  • [28] Simplified framework for economic convenience of base isolation as seismic retrofit solution for existing RC buildings
    Natale, Andrea
    Del Vecchio, Ciro
    Zordan, Tobia
    Di Ludovico, Marco
    [J]. XIX ANIDIS CONFERENCE, SEISMIC ENGINEERING IN ITALY, 2023, 44 : 1768 - 1775
  • [29] Numerical Assessment of an Innovative RC-Framed Skin for Seismic Retrofit Intervention on Existing Buildings
    Talledo, Diego Alejandro
    Rocca, Irene
    Pozza, Luca
    Savoia, Marco
    Saetta, Anna
    [J]. APPLIED SCIENCES-BASEL, 2021, 11 (21):
  • [30] An innovative methodology for seismic retrofitting of existing RC buildings by metal shear panels
    De Matteis, G.
    Formisano, A.
    Mazzolani, F. M.
    [J]. EARTHQUAKE ENGINEERING & STRUCTURAL DYNAMICS, 2009, 38 (01): : 61 - 78
12345