Tribological behaviour of Si3N4-based nanocomposites

被引：16
|
作者：
Zgalat-Lozynskyy, O. [1 ]
Varchenko, V. [1 ]
Tischenko, N. [1 ]
Ragulya, A. [1 ]
Andrzejczuk, M. [2 ]
Polotai, A. [3 ]
机构：
[1] IPMS, UA-03680 Kiev, Ukraine
[2] WUT, PL-02507 Warsaw, Poland
[3] MRA Labs Inc, Adams, MA 01220 USA
来源：
TRIBOLOGY INTERNATIONAL | 2015年 / 91卷
关键词：
Wear; TiN; Si3N4; Nanocomposites; WEAR PROPERTIES; FRICTION;
D O I：
10.1016/j.triboint.2015.06.027
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
A comprehensive study was performed to evaluate tribological performances of newly developed Si3N4-based nanocomposites enhanced by either Si3N4 nanowhiskers or TiN nanoparticles and consolidated via a Rate Controlled Sintering technique. A wear resistance of Si3N4-based nanocomposites was studied under dry sliding conditions using bearing steel, hard alloy, and Si3N4-based nanocomposites counterparts. The Si3N4-TiN nanocomposites exhibited low sliding friction coefficient <035 with hard alloy and <0.25 with Si3N4-based nanocomposite. A specific wear rate for the investigated nanocomposites was estimated to be in the range from 2.10(-7) mm(3)/N m to 5.10(-8) mm(3)/N m. A chemical resistance of the Si3N4-TIN nanocomposite was investigated in aggressive mediums, such as acids and bases at elevated temperatures. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：85 / 93
页数：9
相关论文
共 50 条
  • [21] Fabrication of dense β-Si3N4-based ceramic coating on porous Si3N4 ceramic
    Wang, Chao
    Wang, Hongjie
    Fan, Xingyu
    Zhou, Jun
    Xia, Hongyan
    Fan, Jinpeng
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2015, 35 (06) : 1743 - 1750
  • [22] Basic Bio-Tribological Performance of Insulating Si3N4-Based Ceramic as Human Body Replacement Joints
    Li, Huaqiang
    Chen, Wei
    Shi, Hongxing
    Zhang, Chen
    Liu, Xingwei
    Zhong, Lisheng
    [J]. COATINGS, 2021, 11 (08)
  • [23] ON THE MORPHOLOGY AND COMPOSITION OF THE OXIDIZED LAYER IN SI3N4-BASED MATERIALS
    PENI, F
    CRAMPON, J
    DUCLOS, R
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1993, 163 (01): : L5 - L7
  • [24] QUANTITATIVE PHASE-ANALYSIS OF SI3N4-BASED MATERIALS
    KALL, PO
    [J]. CHEMICA SCRIPTA, 1988, 28 (04): : 439 - 446
  • [25] The mechanical and dielectric properties of Si3N4-based sandwich ceramics
    Zuo, Kai-hui
    Zeng, Yu-ping
    Jiang, Dongliang
    [J]. MATERIALS & DESIGN, 2012, 35 : 770 - 773
  • [26] Design of Si3N4-based ceramic laminates by the residual stresses
    Orlovskaya, N
    Kuebler, J
    Subbotin, V
    Lugovy, M
    [J]. JOURNAL OF MATERIALS SCIENCE, 2005, 40 (20) : 5443 - 5450
  • [27] Tribological behaviour Of Si3N4 and Si3N4-%TiN based composites and multi-layer laminates
    Hadad, M
    Blugan, G
    Kübler, J
    Rosset, E
    Rohr, L
    Michler, J
    [J]. WEAR, 2006, 260 (06) : 634 - 641
  • [28] Fracture toughness of concentric Si3N4-based laminated structures
    Krstic, Zoran
    Krstic, Vladimir D.
    [J]. JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2009, 29 (09) : 1825 - 1829
  • [29] Design of Si3N4-based ceramic laminates by the residual stresses
    N. Orlovskaya
    J. Kuebler
    V. Subbotin
    M. Lugovy
    [J]. Journal of Materials Science, 2005, 40 : 5443 - 5450
  • [30] Thermo-Mechanical Analysis of Si3N4-Based Seal Coatings on Si3N4 Substrate
    Liu, Shan
    Chen, Fei
    Yang, Ying
    Shen, Qiang
    Zhang, Kaipeng
    [J]. MATERIALS INTEGRATION, 2012, 508 : 42 - 47
12345