Processability and Mechanical Properties of CB/PVC Composite

被引：0

作者：

Liu, Xiuqi ^{[1
]}

Xing, Heqin ^{[2
]}

Zhao, Lili ^{[1
]}

Wang, Dan ^{[1
]}

机构：

[1] Jilin Agr Univ, Coll Food Sci & Engn, Changchun 130118, Jilin, Peoples R China

[2] Jilin Univ, Coll Quatermaster Technol, Changchun 130062, Peoples R China

来源：

RESEARCH EFFORTS IN MATERIAL SCIENCE AND MECHANICS ENGINEERING | 2013年 / 681卷

关键词：

PVC; Carbon Black; Composite; Impact Strength; Tensile Strength; BLENDS;

D O I：

10.4028/www.scientific.net/AMR.681.252

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In our study, a new kind of material was prepared by melt blending with PVC as the matrix and carbon black (CB) as the filler. With the amount of CB increasing, the notched impact strength of composite increased greatly, however the tensile strength declined. When the amount of CB was 30%, the notched impact strength of composite was 9.66 KJ/m(2), the tensile strength dropped from 48.3MPa to 33.2MPa. The distribution of CB in the PVC matrix is relatively uniform and no large agglomeration in the PVC matrix.

引用

页码：252 / +

页数：2

共 50 条

[21] Composite polymer electrolytes based on fumed silica: Mechanical response and processability
Raghavan, SR
Khan, SA
PROCEEDINGS OF THE SYMPOSIUM ON LITHIUM POLYMER BATTERIES, 1997, 96 (17): : 74 - 89
[22] Fabrication and analysis of mechanical properties of PVC/Glass fiber/graphene nano composite pipes
Shanmugasundar, G.
Vanitha, M.
Babu, L. Ganesh
Suresh, P.
Mathiyalagan, P.
Krishnan, G. Sai
Makos, Mebratu
MATERIALS RESEARCH EXPRESS, 2020, 7 (11)
[23] Study on the mechanical properties of composite wall covered with PVC eco-wood board
Li, Jiuyang
Fu, Weijia
Li, Fangqi
Li, Daozheng
FERROELECTRICS, 2020, 566 (01) : 54 - 80
[24] Study of the processability of commercial PVC plastisols by rheology
García-Quesada, JC
Marcilla, A
Beltrán, M
JOURNAL OF VINYL & ADDITIVE TECHNOLOGY, 1999, 5 (01): : 31 - 36
[25] Study of the processability of commercial PVC plastisols by rheology
Garcia-Quesada, JC
Marcilla, A
Beltran, M
CONFERENCE PROCEEDINGS AT ANTEC '98: PLASTICS ON MY MIND, VOLS I-3: VOL I; PROCESSING, VOL II; SPECIAL AREAS, VOL III; MATERIALS, 1998, 44 : 1142 - 1145
[26] Study of the processability of commercial PVC plastisols by rheology
Garcia-Quesada, J.C.
Marcilla, A.
Beltran, M.
Journal of Vinyl and Additive Technology, 1999, 5 (01): : 31 - 36
[27] Processability and mechanical properties of extensively recycled high density polyethylene
Oblak, Pavel
Gonzalez-Gutierrez, Joamin
Zupancic, Barbara
Aulova, Alexandra
Emri, Igor
POLYMER DEGRADATION AND STABILITY, 2015, 114 : 133 - 145
[28] EFFECTS OF NICKEL ON MECHANICAL PROPERTIES OF PVC
KUSY, RP
TURNER, DT
SPE JOURNAL, 1973, 29 (07): : 56 - 61
[29] Mechanical properties of PVC structural foam
Li, GQ
TECHNOLOGY TRANSFER IN A GLOBAL COMMUNITY, 1996, 28 : 281 - 292
[30] Processability and mechanical properties of bioplastics produced from decoloured bloodmeal
Verbeek, Casparus Johannes Reinhard
Low, Aaron
Lay, Mark Christopher
Hicks, Talia Maree
ADVANCES IN POLYMER TECHNOLOGY, 2018, 37 (06) : 2102 - 2113

← 1 2 3 4 5 →