Mechanical design and simulation of two-wheeled wheelchair using solidworks

被引：3
|
作者：
Altalmas, T. M. [2 ]
Ahmad, S. [1 ]
Aula, A. [2 ]
Akmeliawati, R. [1 ]
Sidek, S. N. [1 ]
机构：
[1] Int Islamic Univ Malaysia, Dept Mechatron Engn, Gombak 50728, Selangor, Malaysia
[2] Int Islamic Univ Malaysia, Intelligent Mechatron Res Unit, Dept Mechatron Engn, Gombak 50728, Selangor, Malaysia
来源：
5TH INTERNATIONAL CONFERENCE ON MECHATRONICS (ICOM'13) | 2013年 / 53卷
关键词：
D O I：
10.1088/1757-899X/53/1/012042
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This article is presented a new design of two-wheeled wheelchair that can balance on two wheels to make it suitable in the narrow areas, especially in the domestic environments; it has the ability to extend the height of the chair to help the user to act independently in the life for example, in the library to pick and put books on the shelves. The 3D model has been built up using SolidWorks Software. Nowadays, SolidWorks environment is considered as a powerful tool that is helping designer to design products and attain its performance before physical prototype stage. SolidWorks simulation model has been employed to test the frame of the wheelchair under the weight of the human body and the upper part of the wheelchair. The static analysis has been done on the frame using steel and aluminium; however the aluminium material has been selected due to its light weight
引用
收藏
页数：7
相关论文
共 50 条
  • [1] Integrated modeling and design for realizing a two-wheeled wheelchair for disabled
    Altalmas, Tareq
    Aula, Abqori
    Ahmad, Salmiah
    Tokhi, M. O.
    Akmeliawati, Rini
    ASSISTIVE TECHNOLOGY, 2016, 28 (03) : 159 - 174
  • [2] INTEGRATED DESIGN, MODELLING AND ANALYSIS OF TWO-WHEELED WHEELCHAIR FOR DISABLED
    Aula, Abqori
    Altalmas, Tareq M.
    Ahmad, Salmiah
    Akmeliawati, Rini
    Sidek, Shahrul Naim
    Tokhi, M. O.
    NATURE INSPIRED MOBILE ROBOTICS, 2013, : 141 - 152
  • [3] Simulation of a Two-wheeled Self-balancing Wheelchair using ROS-Gazebo
    Haghighat, Mohammad Reza
    Sadeghnejad, Soroush
    2022 10TH RSI INTERNATIONAL CONFERENCE ON ROBOTICS AND MECHATRONICS (ICROM), 2022, : 95 - 101
  • [4] Modelling and simulation of double-link scenario in a two-wheeled wheelchair
    Ahmad, Salmiah
    Siddique, Nazmul H.
    Tokhi, M. O.
    INTEGRATED COMPUTER-AIDED ENGINEERING, 2014, 21 (02) : 119 - 132
  • [5] HEIGHT EXTENSION OF CHAIR ON TWO-WHEELED WHEELCHAIR
    Ahmad, Salmiah
    Tokhi, M. O.
    MOBILE ROBOTICS-SOLUTIONS AND CHALLENGES, 2010, : 258 - 265
  • [6] Analytical Design of a Robust Motion Controller for a Two-Wheeled Wheelchair System
    Dinale, Aiko
    Hirata, Kazuya
    Murakami, Toshiyuki
    2013 16TH INTERNATIONAL CONFERENCE ON ADVANCED ROBOTICS (ICAR), 2013,
  • [7] Effect of design of two-wheeled containers on mechanical loading
    Kingma, I
    Kuijer, PPFM
    Hoozemans, MJM
    Van Dieën, JH
    van der Beek, AJ
    Frings-Dresen, MHW
    INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS, 2003, 31 (02) : 73 - 86
  • [8] Virtual prototyping simulation for the design of two-wheeled vehicles
    Barone, S
    Curcio, A
    Pierucci, F
    DESIGN 2002: Proceedings of the 7th International Design Conference, Vols 1 and 2, 2002, : 449 - 456
  • [9] Parameter Design of Disturbance Observer for a Robust Control of Two-Wheeled Wheelchair System
    Dinale, Aiko
    Hirata, Kazuya
    Zoppi, Matteo
    Murakami, Toshiyuki
    JOURNAL OF INTELLIGENT & ROBOTIC SYSTEMS, 2015, 77 (01) : 135 - 148
  • [10] Parameter Design of Disturbance Observer for a Robust Control of Two-Wheeled Wheelchair System
    Aiko Dinale
    Kazuya Hirata
    Matteo Zoppi
    Toshiyuki Murakami
    Journal of Intelligent & Robotic Systems, 2015, 77 : 135 - 148
12345