HSM MACHINING STABILITY DURING HARDENED STEELS MILLING PROCESS

被引：0
|
作者：
Twardowski, Pawel [1 ]
机构：
[1] Poznan Univ Tech, Inst Mech Technol, Poznan, Poland
来源：
PROCEEDINGS OF THE 9TH BIENNIAL CONFERENCE ON ENGINEERING SYSTEMS DESIGN AND ANALYSIS - 2008, VOL 1 | 2009年
关键词：
CUTTING FORCES; SPEED;
D O I：
暂无
中图分类号：
V [航空、航天];
学科分类号：
08 ; 0825 ;
摘要：
In this paper HSM analysis of milling hardened steels is presented. All cutting parameters under process stability are described as well. The process stability is showing from point of view of self-excited chatter of machined system, assessed basis on signals of the chatter accelerations and components of resultant force.
引用
收藏
页码：289 / 294
页数：6
相关论文
共 50 条
  • [21] A critical review on the progress of MQL in machining hardened steels
    Sultana, Nazma
    Dhar, N. R.
    ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 (04) : 3834 - 3858
  • [22] Research challenges and directions in precision machining of hardened steels
    Davies, MA
    Chou, YK
    Evans, CJ
    PROCEEDINGS OF THE TWELFTH ANNUAL MEETING OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1997, : 451 - 451
  • [23] Influence of cutting tool overhangs at machining of hardened steels
    Faculty of Mechanical Engeniering, Brno University of Technology, Technická 2896/2, Brno
    616 69, Czech Republic
    Manuf. Technol., 2 (188-191):
  • [24] Review of high-speed machining of hardened steels
    Pang, Junzhong
    Wang, Minjie
    Li, Guohe
    Duan, Chunzheng
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2006, 17 (SUPPL. 2): : 421 - 425
  • [25] Linear improvement of the machining stability lobes and application in milling process prediction
    Geng, Z.
    Ridgway, K.
    Turner, S.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2007, 221 (03) : 369 - 378
  • [26] Sustainable machining practices adopted during milling process: a review
    Bhaskar, Sandeep Kumar
    Sain, Manoj Kumar
    Saraswat, Praveen
    International Journal of Machining and Machinability of Materials, 2024, 26 (04): : 362 - 388
  • [27] A review of cryogenic cooling in high speed machining (HSM) of mold and die steels
    Ahmad-Yazid, Aznijar
    Taha, Zahari
    Almanar, Indra Putra
    SCIENTIFIC RESEARCH AND ESSAYS, 2010, 5 (05): : 412 - 427
  • [28] Optimisation of machining parameters during ball end milling of hardened steel with various surface inclinations
    Wojciechowski, S.
    Maruda, R. W.
    Barrans, S.
    Nieslony, P.
    Krolczyk, G. M.
    MEASUREMENT, 2017, 111 : 18 - 28
  • [29] TURNING AND MILLING OF HARDENED STEELS BY MEANS OF COMPOSITE TOOL POINTS
    HOMMEL, B
    KAWALEC, M
    MECHANIK MIESIECZNIK NAUKOWO-TECHNICZNY, 1983, 56 (05): : 269 - 272
  • [30] Chip morphology characterization and modeling in machining hardened 52100 steels
    Morehead, Mason D.
    Huang, Yong
    Luo, Jian
    MACHINING SCIENCE AND TECHNOLOGY, 2007, 11 (03) : 335 - 354
12345