Transparent tetragonal-cubic zirconia composite ceramics densified by spark plasma sintering and hot isostatic pressing

被引:36
|
作者
Dash, Apurv [1 ]
Kim, Byung-Nam [2 ]
Klimke, Jens [3 ]
Vleugels, Jef [1 ]
机构
[1] Katholieke Univ Leuven, Dept Mat Engn, B-3001 Heverlee, Belgium
[2] Natl Inst Mat Sci, 1-2-1 Sengen, Tsukuba, Ibaraki 3050047, Japan
[3] Polycrystal Design GmbH, Dresden, Germany
关键词
Transparent zirconia; Spark plasma sintering; Hot isostatic pressing; Total forward transmission; Ferro-elastic domain switching; YTTRIA-STABILIZED-ZIRCONIA; GRAIN-GROWTH; LIGHT-SCATTERING; MICROSTRUCTURE; RESISTANCE; MECHANISM; SIZE;
D O I
10.1016/j.jeurceramsoc.2018.12.004
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Targeting higher toughness transparent ceramics, tetragonal (3 mol % yttria) and cubic (8 mol % yttria) ZrO2 starting powder mixtures were densified by spark plasma sintering (SPS) in vacuum at 1100 degrees C and post hot isostatic pressing (HIP) in argon at 1100 degrees C. The influence of the ultra-fine microstructure and phase composition on the fracture resistance and light transmission in the visible and infra-red range was assessed. Of special interest was the influence of a thermal annealing step in air on the transparency of the SPS and SPS-HIP ceramics.
引用
收藏
页码:1428 / 1435
页数:8
相关论文
共 50 条
  • [41] Fabrication of Yb,La:CaF2 transparent ceramics by air pre-sintering with hot isostatic pressing
    Huang, Xinyou
    Chen, Guimin
    Wei, Jiabei
    Liu, Ziyu
    Feng, Yagang
    Tian, Feng
    Xie, Tengfei
    Li, Jiang
    OPTICAL MATERIALS, 2021, 116
  • [42] Nd:YAG transparent ceramics fabricated by direct cold isostatic pressing and vacuum sintering
    Ge, Lin
    Li, Jiang
    Zhou, Zhiwei
    Liu, Binglong
    Xie, Tengfei
    Liu, Jing
    Kou, Huamin
    Shi, Yun
    Pan, Yubai
    Guo, Jingkun
    OPTICAL MATERIALS, 2015, 50 : 25 - 31
  • [43] Pressureless reaction sintering and hot isostatic pressing of transparent MgAlON ceramic with high strength
    Zhang, Rongshi
    Wang, Hao
    Tian, Meng
    Wang, Yuezhong
    Liu, Mengyin
    Wang, Haomin
    Zhang, Gaofeng
    CERAMICS INTERNATIONAL, 2018, 44 (14) : 17383 - 17390
  • [44] Highly transparent LiAlON ceramic prepared by reaction sintering and post hot isostatic pressing
    Zhang, Rongshi
    Wang, Yuezhong
    Tian, Meng
    Wang, Hao
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2018, 38 (15) : 5252 - 5256
  • [45] Transparent β-tricalcium phosphate ceramics prepared by spark plasma sintering
    Kawagoe, D
    Ioku, K
    Fujimori, H
    Goto, S
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2004, 112 (1308) : 462 - 463
  • [46] Characterization of Transparent Fluorapatite Ceramics Fabricated by Spark Plasma Sintering
    Furuse, Hiroaki
    Kato, Daichi
    Morita, Koji
    Suzuki, Tohru S.
    Kim, Byung-Nam
    MATERIALS, 2022, 15 (22)
  • [47] Optically transparent ceramics by spark plasma sintering of oxide nanoparticles
    Chaim, Rachman
    Marder, Rachel
    Estournes, Claude
    SCRIPTA MATERIALIA, 2010, 63 (02) : 211 - 214
  • [48] Inversion defects in MgAl2O4 elaborated by pressureless sintering, pressureless sintering plus hot isostatic pressing, and spark plasma sintering
    Mussi, A.
    Granger, G. Bernard
    Addad, A.
    Benameur, N.
    Beclin, F.
    Bataille, A.
    SCRIPTA MATERIALIA, 2009, 61 (05) : 516 - 519
  • [49] Comparisons of grain size-density trajectory during spark plasma sintering and hot-pressing of zirconia
    Bernard-Granger, Guillaume
    Monchalin, Nathalie
    Guizard, Christian
    MATERIALS LETTERS, 2008, 62 (30) : 4555 - 4558
  • [50] Fabrication of highly transparent AlON ceramics by hot isostatic pressing post-treatment
    Jiang, Nan
    Liu, Qiang
    Xie, Tengfei
    Ma, Peng
    Kou, Huamin
    Pang, Yubai
    Li, Jiang
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2017, 37 (13) : 4213 - 4216