A self-tuning ultrasonic sensor based powder injection molding process

被引：5
|
作者：
Hongerholt, DD
Rose, JL
German, RM
机构：
[1] Pennsylvania State University, 114 Hallowell Building, University Park
[2] Pennsylvania State University, 118 Research West Building, University Park
来源：
NDT & E INTERNATIONAL | 1997年 / 30卷 / 06期
基金：
美国国家科学基金会;
关键词：
ultrasonics; powder injection moulding (PIM); process control; simplex;
D O I：
10.1016/S0963-8695(97)00004-2
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Ultrasonic sensors show great promise in defect detection and classification when monitoring the powder injection molding (PIM) manufacturing process. To date, however, these sensors are not used in a closed-loop control system. A simplex method is developed that automatically tunes a manufacturing system operating conditions on the basis of in situ ultrasonic sensor readings. Potential applications for this system include the initial set-up of optimal manufacturing conditions and also tracking of the optimum conditions in situ during long-term operation. (C) 1997 Published by Elsevier Science Ltd. All rights reserved.
引用
收藏
页码：389 / 396
页数：8
相关论文
共 50 条
  • [31] Optimization of coal blending process control based on fuzzy self-tuning
    Yin, Qiang
    Hu, Jiabing
    Tong, Hangming
    Song, Shaoyun
    Zhang, Guoquan
    JOURNAL OF INTELLIGENT & FUZZY SYSTEMS, 2019, 37 (01) : 341 - 349
  • [32] Design of self-tuning controller for wireless sensor networks
    Chen, Yi
    Liu, Ming
    Wai, Sai
    Gao, Ge
    ADVANCING SCIENCE THROUGH COMPUTATION, 2008, : 440 - 443
  • [33] Robust Sensor Fusion with Self-tuning Mixture Models
    Pfeifer, Tim
    Protzel, Peter
    2018 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS), 2018, : 3678 - 3685
  • [34] On-line ultrasonic monitoring of the injection molding process
    Natl Research Council, Boucherville, Canada
    Polym Eng Sci, 2 (363-376):
  • [35] Recent advances in ultrasonic monitoring of the injection molding process
    Wen, SSL
    Jen, CK
    Nguyen, KT
    Derdouri, A
    Simard, Y
    ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPECIAL AREAS;, 1999, : 636 - 640
  • [36] On-line ultrasonic monitoring of the injection molding process
    Wang, H
    Cao, B
    Jen, CK
    Nguyen, KT
    Viens, M
    POLYMER ENGINEERING AND SCIENCE, 1997, 37 (02): : 363 - 376
  • [37] Micro powder injection molding: process characterization and modeling
    Heldele, Richard
    Schulz, Michael
    Kauzlaric, David
    Korvink, Jan G.
    Hausselt, Juergen
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2006, 12 (10-11): : 941 - 946
  • [38] Micro powder injection molding: process characterization and modeling
    Richard Heldele
    Michael Schulz
    David Kauzlaric
    Jan G. Korvink
    Jürgen Haußelt
    Microsystem Technologies, 2006, 12 : 941 - 946
  • [39] A numerical study of solidification in powder injection molding process
    Samanta, Sudip K.
    Chattopadhyay, Himadri
    Pustal, Bjoern
    Berger, Ralf
    Godkhindi, Mahadev Malhar
    Buehrig-Polaczek, Andreas
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2008, 51 (3-4) : 672 - 682
  • [40] Sintering process of diamond products by powder injection molding
    Wu, Q. (meishanzi11@sina.com), 1600, Chinese Ceramic Society (41):
12345