Notched response of non-crimp fabric thin-ply laminates: Analysis methods

被引：38
|
作者：
Arteiro, A. [1 ]
Catalanotti, G. [1 ]
Xavier, J. [2 ]
Camanho, P. P. [1 ]
机构：
[1] Univ Porto, Fac Engn, DEMec, Rua Dr Roberto Frias, P-4200465 Oporto, Portugal
[2] Univ Tras Os Montes & Alto Douro, CITAB, P-5001801 Vila Real, Portugal
来源：
COMPOSITES SCIENCE AND TECHNOLOGY | 2013年 / 88卷
关键词：
Laminate; Fracture; Stress concentrations; FINITE FRACTURE-MECHANICS; STRENGTH; FAILURE; TENSILE; COMPOSITES; CRITERION; STRESS;
D O I：
10.1016/j.compscitech.2013.09.003
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
Analysis methods to predict the open-hole tensile and compressive response of thin-ply non-crimp fabric laminates are investigated in this paper. The point- and average-stress models and the Finite Fracture Mechanics model are used. It is shown that all models predict with reasonable accuracy the observed size effects in both tension and compression. The Finite Fracture Mechanics model, which requires two material properties (the unnotched strength and the fracture toughness) and does not need calibration from a baseline specimen, is used to predict the notched response of thin-ply non-crimp fabric laminates and of typical aerospace grade laminates based on unidirectional pre-impregnated plies. No substantial differences in notch sensitivity and inherent material/geometry brittleness is predicted. (C) 2013 Elsevier Ltd. All rights reserved.
引用
收藏
页码：165 / 171
页数：7
相关论文
共 50 条
  • [21] Viscoelastic modeling and characterization of thin-ply composite laminates
    Hamillage, Milinda Yapa
    Leung, Colin
    Kwok, Kawai
    COMPOSITE STRUCTURES, 2022, 280
  • [22] CSAI analysis of non-crimp fabric cross-ply laminate manufactured through wet compression molding process
    Lee, Sooyoung
    Hong, Chaeyoung
    Choi, Taeseong
    Kim, Hye-gyu
    Im, Seong-Woo
    Kang, Soo-Chang
    Park, Young-Bin
    Ji, Wooseok
    COMPOSITE STRUCTURES, 2021, 255
  • [23] Optimisation of crush energy absorption of non-crimp fabric laminates by through-thickness stitching
    Cauchi-Savona, Silvano
    Zhang, Chi
    Hogg, Paul
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2011, 42 (07) : 712 - 722
  • [24] Analysis of pseudo-ductility in thin-ply carbon fiber angle-ply laminates
    Yuan, Yanan
    Wang, Shen
    Yang, Heng
    Yao, Xuefeng
    Liu, Bin
    COMPOSITE STRUCTURES, 2017, 180 : 876 - 882
  • [25] Draping of biaxial non-crimp fabric on hemispherical shape
    Zheng Ruochen
    Naouar, Naim
    Schaefer, Bastian
    Platzer, Auriane
    Colmars, Julien
    Kaerger, Luise
    Boisse, Philippe
    MATERIAL FORMING, ESAFORM 2024, 2024, 41 : 623 - 630
  • [26] Characterizing the macroscopic response and local deformation mechanisms of a unidirectional non-crimp fabric
    Ghazimoradi, Mehdi
    Trejo, Eleazar A.
    Butcher, Clifford
    Montesano, John
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2022, 156
  • [27] Impact and compression after impact response in thin laminates of spread-tow woven and non-crimp fabrics
    Sasikumar, A.
    Trias, D.
    Costa, J.
    Blanco, N.
    Orr, J.
    Linde, P.
    COMPOSITE STRUCTURES, 2019, 215 : 432 - 445
  • [28] Notched behaviour of discontinuous carbon fibre composites: Comparison with quasi-isotropic non-crimp fabric
    Qian, C.
    Harper, L. T.
    Turner, T. A.
    Warrior, N. A.
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2011, 42 (03) : 293 - 302
  • [29] Nonlinear response in glass fibre non-crimp fabric reinforced vinylester composites
    Joki, R. K.
    Grytten, F.
    Hayman, B.
    COMPOSITES PART B-ENGINEERING, 2015, 77 : 105 - 111
  • [30] Analysis and verification of the degree of bending isotropy of thin laminated composites manufactured using non-crimp fabric
    Albazzan, Mazen A.
    Pascale, Nicole
    Dillard, Tyler
    Gurdal, Zafer
    Harik, Ramy
    Hartzell, Jesse
    COMPOSITE STRUCTURES, 2020, 248
12345