Effect of micro-alloying element Ti on mechanical properties of Cu-Cr alloy

被引：61
|
作者：
Peng, Huaichao [1 ]
Xie, Weibin [1 ]
Chen, Huiming [1 ]
Wang, Hang [1 ]
Yang, Bin [1 ]
机构：
[1] Jiangxi Univ Sci & Technol, Fac Mat Met & Chem, Ganzhou 341000, Jiangxi, Peoples R China
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2021年 / 852卷
关键词：
Cu-Cr alloys; Micro-alloying; Yield strength; Softening resistance; Orowan strengthening; ELECTRICAL-CONDUCTIVITY; HIGH-STRENGTH; MICROSTRUCTURE; PRECIPITATION;
D O I：
10.1016/j.jallcom.2020.157004
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The mechanical properties and microstructure of Cu-Cr and Cu-Cr-Ti alloys after aging treatment were investigated via hardness measurements, electron backscattered diffraction analysis, and transmission electron microscopy. The results show that the hardness, yield strength, and softening temperature of the Cu-Cr-Ti alloy significantly improved. The interface of the Cu matrix and Cr-rich precipitates was semi-coherent as determined by calculations, and the strengthening mechanism of the Cr precipitates was via the Orowan strengthening relation. A high dislocation density was observed in the matrix, which was because of impediment by fine Cr precipitates in the Cu-Cr-Ti alloy. The effects of dislocation strengthening, solid-solution strengthening, and precipitate strengthening were shown to remarkably enhance the yield strength. (C) 2020 Elsevier B.V. All rights reserved.
引用
收藏
页数：9
相关论文
共 50 条
  • [41] Influence of Ag micro-alloying on the microstructure and properties of Cu-7Cr in situ composite
    Liu, Keming
    Lu, Deping
    Zhou, Haitao
    Atrens, Andrej
    Chen, Zhibao
    Zou, Jin
    Zeng, Sumin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 500 (02) : L22 - L25
  • [42] Effect of Micro-Alloying Element La on Solidification Microstructure and Mechanical Properties of Hypoeutectic Al-Si Alloys
    Zheng Qiuju
    Ye Zhongfei
    Jiang Hongxiang
    Lu Ming
    Zhang Lili
    Zhao Jiuzhou
    ACTA METALLURGICA SINICA, 2021, 57 (01) : 103 - 110
  • [43] Effect of Combined Micro-Alloying of Calcium and Bismuth on the Microstructure and Mechanical Properties of AM50 Magnesium Alloy
    Zhang Ya-Qing
    Luo Xiao-Ping
    Dang Su-E
    ADVANCED ENGINEERING MATERIALS, 2014, 16 (11) : 1318 - 1322
  • [44] Effects of Ag micro-alloying on heat-resistant properties of Al-Cu-Mg-Mn-(Zr, Ti) alloy
    Central South University, Changsha 410083, China
    不详
    Tezhong Zhuzao Ji Youse Hejin, 2007, 1 (7-10): : 7 - 10
  • [45] Microstructures and mechanical properties of spark plasma sintered Cu-Cr composites prepared by mechanical milling and alloying
    Fang, Qiang
    Kang, Zhixin
    Gan, Yiwei
    Long, Yan
    MATERIALS & DESIGN, 2015, 88 : 8 - 15
  • [46] Synergistic effect of Al and Ti micro-alloying in CoCrNi-based medium entropy alloy
    Wu, Wentao
    Fu, Hua
    Xue, Zhaojiang
    Fan, Wenjie
    Gan, Bin
    Jiang, Naisheng
    Xia, Min
    Zhao, Feng
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 29 : 1962 - 1970
  • [47] The effect of micro-crystallizing on the oxidation resistance of Cu-Cr alloy in air
    Ma, Jing
    He, Yedong
    Gao, Wei
    Wang, Jun
    Sun, Baode
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 488 (1-2): : 311 - 317
  • [48] Effect of micro-alloying element P on the pitting behavior of copper
    Bai, Xingtao
    Guo, Rui
    Mao, Feixiong
    Macdonald, Digby D.
    CORROSION SCIENCE, 2023, 211
  • [49] Improvement of mechanical properties in micro-alloying Al-Si-Mg-Zn cast alloy
    Wang, Dongtao
    Zhang, Xiaozu
    Xu, Songsong
    Nagaumi, Hiromi
    Li, Xinzhong
    MATERIALS LETTERS, 2021, 283
  • [50] Influence of micro-alloying elements addition and technology on mcirostructure and properties of Cu-Cu3P alloy
    2000, J Off Spec Casting Nonferrous Alloys, China
12345