Effect of micro-alloying element Ti on mechanical properties of Cu-Cr alloy

被引：61
|
作者：
Peng, Huaichao [1 ]
Xie, Weibin [1 ]
Chen, Huiming [1 ]
Wang, Hang [1 ]
Yang, Bin [1 ]
机构：
[1] Jiangxi Univ Sci & Technol, Fac Mat Met & Chem, Ganzhou 341000, Jiangxi, Peoples R China
来源：
JOURNAL OF ALLOYS AND COMPOUNDS | 2021年 / 852卷
关键词：
Cu-Cr alloys; Micro-alloying; Yield strength; Softening resistance; Orowan strengthening; ELECTRICAL-CONDUCTIVITY; HIGH-STRENGTH; MICROSTRUCTURE; PRECIPITATION;
D O I：
10.1016/j.jallcom.2020.157004
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
The mechanical properties and microstructure of Cu-Cr and Cu-Cr-Ti alloys after aging treatment were investigated via hardness measurements, electron backscattered diffraction analysis, and transmission electron microscopy. The results show that the hardness, yield strength, and softening temperature of the Cu-Cr-Ti alloy significantly improved. The interface of the Cu matrix and Cr-rich precipitates was semi-coherent as determined by calculations, and the strengthening mechanism of the Cr precipitates was via the Orowan strengthening relation. A high dislocation density was observed in the matrix, which was because of impediment by fine Cr precipitates in the Cu-Cr-Ti alloy. The effects of dislocation strengthening, solid-solution strengthening, and precipitate strengthening were shown to remarkably enhance the yield strength. (C) 2020 Elsevier B.V. All rights reserved.
引用
收藏
页数：9
相关论文
共 50 条
  • [1] Effect of Ti on the microstructure and properties of Cu-Cr alloy
    Fu, Shaoli
    Chen, Xiaohong
    Liu, Ping
    Zhou, Honglei
    Li, Wei
    Ma, Fengcang
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 27 : 3825 - 3834
  • [2] Preparation of Cu-Cr alloy powder by mechanical alloying
    Zhao, Q. (qingzhao0121@gmail.com), 1600, Elsevier Ltd (607):
  • [3] Preparation of Cu-Cr alloy powder by mechanical alloying
    Zhao, Qing
    Shao, Zhongbao
    Liu, Chengjun
    Jiang, Maofa
    Li, Xuetian
    Zevenhoven, Ron
    Saxen, Henrik
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 607 : 118 - 124
  • [4] Effect of Ti addition on the microstructure and properties of Cu-Cr alloy
    Fang, Hang
    Liu, Ping
    Chen, Xiaohong
    Zhou, Honglei
    Fu, Shaoli
    Liu, Kejie
    Liu, Hang
    Guo, Weichun
    MATERIALS SCIENCE AND TECHNOLOGY, 2021, 37 (06) : 672 - 681
  • [5] Influence of micro-alloying with silver on microstructure and mechanical properties of Al-Cu alloy
    Mandal, Purnendu Kumar
    Robi, P. S.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 722 : 99 - 111
  • [6] Effect of Cr distribution on the properties of Cu-Cr alloy
    Department of Materials Science and Engineering, Xi'an Jiaotong University, Xi'an 710049, China
    不详
    不详
    Gongneng Cailiao, 2007, 7 (1125-1127+1131):
  • [7] Effect of Ag addition on the microstructure and mechanical properties of Cu-Cr alloy
    Xu, Sheng
    Fu, Huadong
    Wang, Yingtao
    Xie, Jianxin
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 726 : 208 - 214
  • [8] Effect of La,Zr micro-alloying on the microstructure and mechanical properties of Al-5Mg-0.2Ti alloy
    Yu, Aiwu
    Yang, Chenggang
    He, Peng
    Liu, Fencheng
    Wang, Shanlin
    Chen, He
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2016, 45 (03): : 760 - 764
  • [9] Effect of La, Zr Micro-alloying on the Microstructure and Mechanical Properties of Al-5Mg-0.2Ti Alloy
    Yu Aiwu
    Yang Chenggang
    He Peng
    Liu Fencheng
    Wang Shanlin
    Chen He
    RARE METAL MATERIALS AND ENGINEERING, 2016, 45 (03) : 760 - 764
  • [10] Effects of micro-alloying on microstructure and mechanical properties of Cu-15Cr in-situ composites
    School of Materials Science and Engineering, Xi'an University of Technology, Xi'an 710048, China
    不详
    不详
    Cailiao Rechuli Xuebao, 2009, 2 (44-48):
12345