Research on the Microstructure and Properties for Nb-contained Cold-rolling High Strength Steel Sheet

被引:0
|
作者
Chen, Yu [1 ]
Liu, Xiangdong [1 ]
Wang, Lihui [1 ]
机构
[1] Wuhan Iron & Steel Grp Co, R&D Ctr, Wuhan 430080, Hubei, Peoples R China
来源
关键词
cold-rolling high strength steel; grain strengthening; (111) textile fiber; NbC precipitation;
D O I
10.4028/www.scientific.net/AMR.602-604.488
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
high strength high plasticity high beneficial textile cold-rolling steel with 540MPa tensile strength 27% elongation 1.67 (111) textile index is developed in industry. The experimental results show that the ferrite fine grain around 5ilm supports the properties of both high strength and plasticity, while the ferrite with percentage more than 90% leads to high elongation, and the large number second precipitation phase NbC with uniform fine size around lOnm is helpful to fine ferrite grain and form strong(111)textile fiber.
引用
收藏
页码:488 / 491
页数:4
相关论文
共 50 条
  • [21] Research on the design of cold rolled ultra high strength sheet steel
    Zhu Xiaodong
    [J]. Baosteel Technical Research, 2008, 2 (04) : 3 - 7
  • [22] Influence of Cold-Rolling Reduction on Microstructure and Tensile Properties of Nuclear FeCrAl Alloy with Low Cr and Nb Contents
    Hui Wang
    Biao Guo
    Xuguang An
    Yu Zhang
    [J]. Acta Metallurgica Sinica (English Letters), 2022, 35 : 2101 - 2110
  • [23] Influence of Cold-Rolling Reduction on Microstructure and Tensile Properties of Nuclear FeCrAl Alloy with Low Cr and Nb Contents
    Wang, Hui
    Guo, Biao
    An, Xuguang
    Zhang, Yu
    [J]. ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2022, 35 (12) : 2101 - 2110
  • [24] Influence of Cold-Rolling Reduction on Microstructure and Tensile Properties of Nuclear FeCrAl Alloy with Low Cr and Nb Contents
    Hui Wang
    Biao Guo
    Xuguang An
    Yu Zhang
    [J]. Acta Metallurgica Sinica(English Letters), 2022, 35 (12) : 2101 - 2110
  • [25] Effect of cold-rolling on microstructure, texture and mechanical properties of an equiatomic FeCrCuMnNi high entropy alloy
    Shabani, Ali
    Toroghinejad, Mohammad Reza
    Shafyei, Ali
    Cavaliere, Pasquale
    [J]. MATERIALIA, 2018, 1 : 175 - 184
  • [26] Research on Microstructure and Mechanical Properties of High Strength Steel
    Zhu, Pengxiao
    Li, Yi
    Feng, Kun
    Wang, Xiaoming
    Fan, Huiji
    [J]. 2ND INTERNATIONAL CONFERENCE ON FRONTIERS OF MATERIALS SYNTHESIS AND PROCESSING, 2019, 493
  • [27] Development of a high strength and ductile Nb-bearing dual phase steel by cold-rolling and intercritical annealing of the ferrite-martensite microstructures
    Kalashami, Ali Ghatei
    Kermanpur, Ahmad
    Najafizadeh, Abbas
    Mazaheri, Yousef
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 658 : 355 - 366
  • [28] The introduction and solvent of cold-rolling automobile sheet surface quality defects in BX Steel
    KANG Haijun Technology Center
    [J]. Baosteel Technical Research, 2010, 4(S1) (S1) : 52 - 52
  • [29] COLD-ROLLING STAINLESS-STEEL WITH THE Z-HIGH RETROFIT
    WINANS, TO
    [J]. IRON AND STEEL ENGINEER, 1983, 60 (03): : 76 - 76
  • [30] NEW HIGH-PERFORMANCE EMULSION FOR THE COLD-ROLLING OF STRIP STEEL
    STEINHAUER, R
    LANGE, V
    GRAHLERT, H
    [J]. NEUE HUTTE, 1985, 30 (02): : 49 - 50