Micro-fabrication of high-aspect ratio three-dimensional micro-components

被引：0
|
作者：
Farsari, M [1 ]
Claret-Tournier, F [1 ]
Chatwin, CR [1 ]
Huang, S [1 ]
Birch, PM [1 ]
Young, RC [1 ]
Budgett, DM [1 ]
Richardson, JD [1 ]
机构：
[1] Univ Sussex, Sch Engn, Brighton BN1 9RH, E Sussex, England
来源：
ADVANCES IN MANUFACTURING TECHNOLOGY - XIII | 1999年
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A new stereo-photolithography technique to create three-dimensional microcomponents using a planer, layer-by-layer, process of exposure has been developed. With this procedure it is possible to build components with dimensions in the range of 50 microns to 50mm, with feature sizes as small as a few microns. This newly developed system consists of eight elements: a Computer Aided Design environment supporting solid or surface modeling; a resin bath, with an integrated high resolution translation stage and component build platform; an ultraviolet laser light source, operating at 351.1 nm; an optical shutter; a diffractive optical element designed to re-distribute the irradiance of the laser beam from a Gaussian to a top-hat profile; a polysilicon thin film twisted nematic SVGA resolution (800x600) spatial light modulator; a multi-element lithographic reduction lens system; and a comprehensive control system. In this paper, the experimental set-up is described and some examples of the microcomponents fabricated by the system are shown.
引用
收藏
页码：21 / 25
页数：5
相关论文
共 50 条
  • [21] Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation
    Wang, Leyan
    Zhang, Dongxian
    Wen, Zhenghu
    Zhang, Haijun
    MICROSCOPY RESEARCH AND TECHNIQUE, 2009, 72 (10) : 717 - 722
  • [22] Micro-fabrication of high aspect ratio periodic structures on stainless steel by picosecond direct laser interference patterning
    Aguilar-Morales, Alfredo I.
    Alamri, Sabri
    Lasagni, Andres Fabian
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2018, 252 : 313 - 321
  • [23] Maskless lithography of silazanes for fabrication of ceramic micro-components
    Ligon, S. Clark
    Blugan, G.
    Kuebler, J.
    CERAMICS INTERNATIONAL, 2019, 45 (02) : 2345 - 2350
  • [24] Fabrication of high-aspect ratio micro holes on hard brittle materials -Study on electrorheological fluid-assisted micro ultrasonic machining-
    Tateishi, T.
    Yoshihara, N.
    Yan, J.
    Kuriyagawa, T.
    ADVANCES IN ABRASIVE TECHNOLOGY XI, 2009, 389-390 : 264 - 270
  • [25] Three-dimensional simulation of micro air vehicles with low-aspect-ratio wings
    Zhang, X. Q.
    Tian, L.
    PROGRESS OF PRECISION ENGINEERING AND NANO TECHNOLOGY, 2007, 339 : 377 - +
  • [26] Buckling patterns of thin films on curved compliant substrates with applications to morphogenesis and three-dimensional micro-fabrication
    Chen, Xi
    Yin, Jie
    SOFT MATTER, 2010, 6 (22) : 5667 - 5680
  • [27] Fabrication of high-aspect-ratio electrode arrays for three-dimensional microbatteries
    Chamran, Fardad
    Yeh, Yuting
    Min, Hong-Seok
    Dunn, Bruce
    Kim, Chang-Jin
    JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 2007, 16 (04) : 844 - 852
  • [28] Fabrication of high aspect ratio micro electrode by using EDM
    Elsiti, Nagwa Mejid
    Noordin, M. Y.
    Alkali, Adam Umar
    2ND INTERNATIONAL MANUFACTURING ENGINEERING CONFERENCE AND 3RD ASIA-PACIFIC CONFERENCE ON MANUFACTURING SYSTEMS (IMEC-APCOMS 2015), 2016, 114
  • [29] Fabrication of high-aspect ratio, micro-fluidic channels and tunnels using femtosecond laser pulses and chemical etching
    Bellouard, Y
    Said, A
    Dugan, M
    Bado, P
    OPTICS EXPRESS, 2004, 12 (10): : 2120 - 2129
  • [30] Micro-fabrication by laser radiation forces: A direct route to reversible free-standing three-dimensional structures
    Athanasekos, Loukas
    Vasileiadis, Miltiadis
    Mantzaridis, Christos
    Karoutsos, Vagelis C.
    Koutselas, Ioannis
    Pispas, Stergios
    Vainos, Nikolaos A.
    OPTICS EXPRESS, 2012, 20 (22): : 24735 - 24740
12345