High temperature oxidation of Cr-Mo-V tool steel in carbon dioxide

被引：7

作者：

Chaliampalias, D. ^{[1
]}

Vourlias, G. ^{[1
]}

Pavlidou, E. ^{[1
]}

Chrissafis, K. ^{[1
]}

机构：

[1] Aristotle Univ Thessaloniki, GR-54006 Thessaloniki, Greece

来源：

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY | 2013年 / 113卷 / 03期

关键词：

Metals and Alloys; Microstructure; Scanning Electron Microscopy; Thermogravimetric measurements; ALLOYS; METAL;

D O I：

10.1007/s10973-013-2947-0

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This study aims to examine the oxidation resistance and kinetics of Cr, Mo, and V containing tool steel (Calmax) when exposed in CO2 high temperature environment by thermogravimetric measurements, X-ray diffraction analysis, and microscopic observation. The tool steel samples begin to oxidize at 480 A degrees C while over 600 A degrees C, the oxidation rate increases significantly. Finally, at 900 A degrees C, the oxidation rate is significantly high. The activation energy of the oxidation was calculated as 160.1 kJ mol(-1). Microscopically, the thickness of the scale was found to increase with the exposure temperature, and the as formed scales consisted of two distinguishable oxide layers.

引用

页码：1309 / 1315

页数：7

共 50 条

[31] WEAR RESISTANCE OF DUPLEX COATED CR-MO-V ALLOYED STEEL
Kolarikova, Marie
Suchanek, Jan
21ST INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2012), 2012, : 1044 - 1047
[32] EFFECTS OF SULFUR AND PHOSPHORUS ON THE CREEP DUCTILITY OF A CR-MO-V STEEL
TAKASUGI, T
POPE, DP
MATERIALS SCIENCE AND ENGINEERING, 1983, 57 (01): : 15 - 20
[33] Effects of plasma nitriding on low alloy Cr-Mo-V steel
Trinadh, K.
Nouveau, C.
Rao, K. Ram Mohan
MATERIALS TODAY-PROCEEDINGS, 2021, 40 : S79 - S82
[34] NONDESTRUCTIVE EVALUATION OF TEMPER EMBRITTLEMENT IN CR-MO-V ROTOR STEEL
KADOYA, Y
GOTO, T
TAKEI, M
HARUKI, N
IKUNO, T
NISHIMURA, Y
JSME INTERNATIONAL JOURNAL SERIES I-SOLID MECHANICS STRENGTH OF MATERIALS, 1992, 35 (02): : 226 - 233
[35] THE EFFECT OF SULFUR ON THE HOT TENSILE DUCTILITY OF CR-MO-V STEEL
GEORGE, EP
POPE, DP
JOURNAL OF METALS, 1985, 37 (11): : A121 - A121
[36] Repair welding on defects of Cr-Mo and Cr-Mo-V casting steel pieces such as casings
Liu, Changjiang
Tian, Shubin
Huang, Rong
Cao, Dequan
Qilunji Jishu/Turbine Technology, 2000, 42 (01): : 56 - 59
[37] Examination of the oxidation resistance of Cr–Mo–V tool steel by thermal analysis
D. Chaliampalias
G. Vourlias
E. Pavlidou
K. Chrissafis
Journal of Thermal Analysis and Calorimetry, 2012, 108 : 677 - 684
[38] Effect of heat treatment parameters on mechanical properties of high strength Cr-Mo-V steel
Hui, Weijun
Dong, Han
Weng, Yuqing
Wang, Maoqiu
Chen, Silian
Shi, Jie
Jinshu Xuebao/Acta Metallurgica Sinica, 2002, 38 (10): : 1009 - 1014
[39] Effect of constraint on creep fracture toughness of a Cr-Mo-V steel
Zhang, Kun
Tan, Jianping
Chang, Shuai
Zhu, Wenbo
Tu, Shantung
THEORETICAL AND APPLIED FRACTURE MECHANICS, 2024, 131
[40] MORPHOLOGICAL AND COMPOSITIONAL CHANGES OF THE CARBIDES IN CR-MO-V FERRITIC STEEL
SINGH, R
BANERJEE, S
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 132 : 203 - 211

← 1 2 3 4 5 →