Evaluation of Different Control Policies of Semi-active MR Fluid Damper of a Quarter-car Model

被引:3
|
作者
Rahman, Mahmudur [1 ]
Rashid, Muhammad M. [1 ]
Muthalif, Asan G. A. [1 ]
Kasemi, Banna [1 ]
机构
[1] Kulliyyah Engn Int Islamic Univ Malaysia, Dept Mechatron Engn, Selayang, Selangor, Malaysia
来源
关键词
Magneto-rheological (MR) damper; Quarter-car model; LQR; semi-active devices; SUSPENSION SYSTEM; VIBRATION;
D O I
10.4028/www.scientific.net/AMM.165.310
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Proportional Integral Derivative and clipped-optimal control strategy controllers are studied to control the response of Quarter-car suspension profile. A Semi-active device is used for this purpose because it carries valuable result which maintains the reliability of passive control methods and includes the advantage of the adjustable parameter characteristics of active systems. Semi-active devices like Magnetorheological fluids dampers are very effective to control vibration, which use MR fluids to produce controllable damping force and provide both the reliability of passive systems and the facility of active control systems with small power supply. The quarter car model is used here can be described as a nonlinear two degrees of freedom system which is subject to excitation from different road profile. For the best possible reduction of vibration in suspension systems, various Magnetorheological damper models are studied which Bouc-wen model, Neuro-fuzzy model and Bingham model. The performances of these models are evaluated to select a best model. The quarter-car model is executed using step input with two most common and effective control algorithm in vehicle suspension control which are linear quadratic regulator control, and Proportional Integral Derivative control algorithm. The main objective of this study is to evaluate performances of these control algorithms.
引用
收藏
页码:310 / 315
页数:6
相关论文
共 50 条
  • [21] Automotive MR damper modeling for semi-active vibration control
    Kasprzyk, Jerzy
    Wyrwal, Janusz
    Krauze, Piotr
    2014 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM), 2014, : 500 - 505
  • [22] Adaptive Control of Semiactive Quarter Car Model with MR Damper
    Yildiz, Ali S.
    Sivrioglu, S.
    Zergeroglu, E.
    Cetin, S.
    2013 9TH ASIAN CONTROL CONFERENCE (ASCC), 2013,
  • [23] Sensitivity control of a MR-damper semi-active suspension
    Arjon Turnip
    Seonghun Park
    Keum-Shik Hong
    International Journal of Precision Engineering and Manufacturing, 2010, 11 : 209 - 218
  • [24] Evaluation of a commercial MR damper for application in semi-active suspension
    Rangaraj Madhavrao Desai
    Mohibb E. Hussain Jamadar
    Hemantha Kumar
    Sharnappa Joladarashi
    S. C. Rajasekaran
    G. Amarnath
    SN Applied Sciences, 2019, 1
  • [25] Semi-active H∞ control of seat suspension with MR damper
    Yao, H. J.
    Fu, J.
    Yu, M.
    Peng, Y. X.
    13TH INTERNATIONAL CONFERENCE ON ELECTRORHEOLOGICAL FLUIDS AND MAGNETORHEOLOGICAL SUSPENSIONS (ERMR2012), 2013, 412
  • [26] SMART SEMI-ACTIVE MR DAMPER TO CONTROL THE STRUCTURAL RESPONSE
    Hazaveh, Nikoo K.
    Chase, J. Geoffrey
    Rodgers, Geoffrey W.
    Pampanin, Stefano
    BULLETIN OF THE NEW ZEALAND SOCIETY FOR EARTHQUAKE ENGINEERING, 2015, 48 (04): : 235 - 244
  • [27] Performance evaluation of semi-active optimal control system by Mr Damper: Evaluation of system properties of semi-active optimal control system and control parameter determination
    Fujii, Takahiro
    Fujitani, Hideo
    Mukai, Yoichi
    Journal of Structural and Construction Engineering, 2013, 78 (689): : 1237 - 1245
  • [28] Design optimization of quarter-car models with passive and semi-active suspensions under random road excitation
    Verros, G
    Natsiavas, S
    Papadimitriou, C
    JOURNAL OF VIBRATION AND CONTROL, 2005, 11 (05) : 581 - 606
  • [29] Performance evaluation of semi-active control with magnetorheological damper
    Yang, Shaopu
    Pan, Cunzhi
    Guo, Shuqi
    Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Vol 1, Pts A-C, 2005, : 2263 - 2268
  • [30] Integrated design of a quarter-car semi-active suspension system using a convex integrated design method
    Fu, Ke
    Mills, James K.
    INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 2006, 42 (3-4) : 328 - 347