Determination of dynamic mode I fracture toughness of rock at ambient high temperatures using notched semi-circular bend method

被引：12
|
作者：
Wu, You [1 ]
Yin, Tu-bing [1 ]
Liu, Xi-ling [1 ]
Tan, Xiao-song [1 ]
Yang, Zheng [1 ]
LI, Qiang [1 ]
机构：
[1] Cent South Univ, Sch Resources & Safety Engn, Changsha 410083, Peoples R China
来源：
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA | 2022年 / 32卷 / 09期
基金：
中国国家自然科学基金;
关键词：
ambient high-temperature condition; dynamic fracture toughness; notched semi-circular bend specimen; split Hopkinson pressure bar; Fujian granite; MECHANICAL-PROPERTIES; STATISTICAL-ANALYSIS; THERMAL-TREATMENT; LOADING-RATE; PRESSURE; PARAMETERS; GRANITE; INITIATION; BEHAVIORS; SPECIMEN;
D O I：
10.1016/S1003-6326(22)66001-1
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
To investigate the influence of loading rate and high temperature on the dynamic fracture toughness of rock, dynamic fracture tests were carried out on notched semi-circular bend specimens under four temperature conditions based on the split Hopkinson pressure bar system. Experimental and analytical methods were applied to investigating the effect of temperature gradient on the stress waves. A high-speed camera was used to check the fracture characteristics of the specimens. The results demonstrate that the temperature gradient on the bars will not significantly distort the shape of the stress wave. The dynamic force balance is achieved even when the specimens are at a temperature of 400 degrees C. The dynamic fracture toughness linearly develops with the increase of loading rate within the temperature range of 25-400 degrees C, and high temperature has a strengthening effect on the dynamic fracture toughness.
引用
收藏
页码：3036 / 3050
页数：15
相关论文
共 50 条
  • [21] Numerical Investigation of Dynamic Rock Fracture Toughness Determination Using a Semi-Circular Bend Specimen in Split Hopkinson Pressure Bar Testing
    Y. Xu
    F. Dai
    N. W. Xu
    T. Zhao
    Rock Mechanics and Rock Engineering, 2016, 49 : 731 - 745
  • [22] Numerical Investigation of Dynamic Rock Fracture Toughness Determination Using a Semi-Circular Bend Specimen in Split Hopkinson Pressure Bar Testing
    Xu, Y.
    Dai, F.
    Xu, N. W.
    Zhao, T.
    ROCK MECHANICS AND ROCK ENGINEERING, 2016, 49 (03) : 731 - 745
  • [23] Application of discrete element method for validity evaluation of rock dynamic fracture toughness measured by semi-circular bend technique
    Kazerani, T.
    Zhao, J.
    HARMONISING ROCK ENGINEERING AND THE ENVIRONMENT, 2012, : 1213 - 1216
  • [24] Experimental and Numerical Analysis of Mode I Fracture Process of Rock by Semi-Circular Bend Specimen
    Xiao, Peng
    Li, Diyuan
    Zhao, Guoyan
    Liu, Meng
    MATHEMATICS, 2021, 9 (15)
  • [25] Microcracking behavior of two semi-circular bend specimens in mode I fracture toughness test of granite
    Wong, Louis Ngai Yuen
    Guo, Tian Yang
    ENGINEERING FRACTURE MECHANICS, 2019, 221
  • [26] Influence of Notch Geometry on the Rock Fracture Toughness Measurement Using the ISRM Suggested Semi-Circular Bend (SCB) Method
    Zhao, Geli
    Yao, Wei
    Li, Xing
    Xu, Ying
    Xia, Kaiwen
    Chen, Rong
    ROCK MECHANICS AND ROCK ENGINEERING, 2022, 55 (04) : 2239 - 2253
  • [27] Influence of Notch Geometry on the Rock Fracture Toughness Measurement Using the ISRM Suggested Semi-Circular Bend (SCB) Method
    Geli Zhao
    Wei Yao
    Xing Li
    Ying Xu
    Kaiwen Xia
    Rong Chen
    Rock Mechanics and Rock Engineering, 2022, 55 : 2239 - 2253
  • [28] Dynamic Fracture Properties of Rocks Subjected to Static Pre-load Using Notched Semi-circular Bend Method
    Rong Chen
    Kang Li
    Kaiwen Xia
    Yuliang Lin
    Wei Yao
    Fangyun Lu
    Rock Mechanics and Rock Engineering, 2016, 49 : 3865 - 3872
  • [29] Dynamic Fracture Properties of Rocks Subjected to Static Pre-load Using Notched Semi-circular Bend Method
    Chen, Rong
    Li, Kang
    Xia, Kaiwen
    Lin, Yuliang
    Yao, Wei
    Lu, Fangyun
    ROCK MECHANICS AND ROCK ENGINEERING, 2016, 49 (10) : 3865 - 3872
  • [30] Prediction of Mode-I Fracture Toughness of the ISRM-Suggested Semi-Circular Bend Rock Specimen Using ANN and Optimized ANN Models
    Ogunsola, Nafiu Olanrewaju
    Lawal, Abiodun Ismail
    Kim, Gyeonggyu
    Kim, Hanlim
    Cho, Sangho
    ROCK MECHANICS AND ROCK ENGINEERING, 2024, 57 (11) : 9983 - 10008
12345