2-DOF Contact Location Display for Manipulating Virtual Objects

A novel, low inertia, two degree-of-freedom (2-DOF) contact location display (CLD) device has been designed, prototyped, and tested. This device positions a small spherical contactor beneath the user's fingerpad at the point of contact between the finger and a virtual surface. Kinesthetic forces are provided by a custom haptic device attached to the CLD. The contactor is remotely driven by push-pull wires to reduce the effective inertia of the device at the user's fingertip; however, this design results in significant mechanical backlash. This backlash is characterized and partially compensated for in software. An experiment was used to evaluate several methods of rendering tactile feedback, each using a different method of prepositioning the contactor. The results show no statistical performance differences between rendering conditions. However, a post-experiment survey shows that participants perceived contact location + kinesthetic feedback as more realistic than pure kinesthetic feedback.