Influence of fatigue damage on ultimate tensile stress of sintered iron

被引：0
|
作者：
Palma, ES
机构：
[1] Department of Mechanical Engineering, UFMG, Campus Pampulha, 31260-901 Belo Horizonte, MG, Av. Antônio Carlos
来源：
POWDER METALLURGY | 1997年 / 40卷 / 03期
关键词：
D O I：
10.1179/pom.1997.40.3.211
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Conventional powder metallurgical techniques have been employed to manufacture two levels of sintered porosities in technically pure iron. The porous iron specimens were cyclically loaded with a number of cycles n lower than their expected life N then quasistatically pulled to failure. The ultimate tensile stress (UTS) values of these damaged specimens have been compared with UTS values of virgin specimens. It has been shown that static resistance (UTS) decreases almost linearly with cumulative damage at repeated loading. The decrease in UTS is greater at higher porosity levels and when a tensile (positive) mean stress is used for the cyclic loading.
引用
收藏
页码：211 / 213
页数：3
相关论文
共 50 条
  • [31] On ultimate damage of material in the stress concentrator zone
    Chausov N.G.
    Lebedev A.A.
    Bogdanovich A.Z.
    [J]. Strength of Materials, 2002, 34 (6) : 548 - 552
  • [32] INFLUENCE OF HOMOGENEITY ON THE FATIGUE PROPERTIES OF SINTERED STEELS
    SONSINO, CM
    SCHLIEPER, G
    HUPPMANN, WJ
    [J]. INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1984, 20 (01): : 45 - 50
  • [33] Tensile and Fatigue Properties of Fe-Cu-C Sintered Steels
    Surapunt, Supachai
    Mutoh, Yoshiharu
    [J]. ADVANCED COMPUTATIONAL ENGINEERING AND EXPERIMENTING II, 2013, 553 : 99 - +
  • [34] Influence of strain rate on ultimate tensile stress of coarse-grained and ultrafine-grained copper
    Kvackaj, Tibor
    Kovacova, Andrea
    Kvackaj, Michal
    Pokorny, Imrich
    Kocisko, Robert
    Donic, Tibor
    [J]. MATERIALS LETTERS, 2010, 64 (21) : 2344 - 2346
  • [35] Influence of Fatigue Damage on Criticality Cell Ultimate Load Capacity of Steel-Concrete Composite Section
    Wang, Haibo
    Wu, Shasha
    [J]. BUILDINGS, 2023, 13 (05)
  • [36] FATIGUE-STRENGTH OF CARBONYL SINTERED IRON AND INTERGRANULAR FRACTURE IN FATIGUE TEST
    HONDA, T
    [J]. JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1984, 48 (01) : 63 - 70
  • [37] On the estimation of ultimate tensile stress from small punch testing
    Altstadt, E.
    Houska, M.
    Simonovski, I.
    Bruchhausen, M.
    Holmstrom, S.
    Lacalle, R.
    [J]. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2018, 136 : 85 - 93
  • [38] EFFECT OF PHOSPHORUS ADDITIONS ON TENSILE, FATIGUE, AND IMPACT STRENGTH OF SINTERED STEELS BASED ON SPONGE IRON POWDER AND HIGH-PURITY ATOMIZED IRON POWDER
    LINDSKOG, P
    [J]. POWDER METALLURGY, 1973, 16 (32) : 374 - 386
  • [39] Effect of ensemble of stress concentrators on the ultimate tensile strength of material
    Voskoboinikov, RE
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2001, 299 (01) : 68 - 76
  • [40] Mean stress sensitivity of sintered iron and steel
    Namazov, SN
    Abdalla, G
    Dalgic, A
    Gudenau, HW
    Beiss, P
    [J]. ZEITSCHRIFT FUR METALLKUNDE, 2003, 94 (06): : 737 - 742
12345