Study on Nugget Diameter and Joint Strength of Dissimilar Metals in Capacitor Charging Projection Welding

被引：1
|
作者：
Tseng, Kuang-Hung [1 ]
Chen, Yung-Chuan [1 ]
机构：
[1] Natl Pingtung Univ Sci & Technol, Dept Mat Engn, Pingtung 91201, Taiwan
来源：
MATERIALS ENGINEERING FOR ADVANCED TECHNOLOGIES, PTS 1 AND 2 | 2011年 / 480-481卷
关键词：
Nugget diameter; joint strength; dissimilar metal; projection welding; THIN SHEET METALS; QUALITY; WELDABILITY; GEOMETRY; HEIGHT;
D O I：
10.4028/www.scientific.net/KEM.480-481.427
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The purpose of this study was to investigate the effect of operating conditions on nugget diameter and joint strength of KOVAR alloy and SPCC steel in projection welding of dissimilar metals. All projection welds were produced with a capacitor charging power supply. Harris and Riley type projection was embossed on SPCC steel sheet. The nugget diameter was estimated using a peel test. The lap-joint strength of projection welds was evaluated using a tensile-shear test. The results indicated that the nugget diameter and joint strength increase as the weld current increase. Increasing the electrode force will produce a small nugget diameter. The nugget diameter of projection welds is a good indicator of the lap-joint strength.
引用
收藏
页码：427 / 432
页数：6
相关论文
共 50 条
  • [41] Improving joint strength of the friction stir welding of dissimilar aluminium alloy by using coating technique
    G Gopala Krishna
    Sādhanā, 2022, 47
  • [42] Bond strength and bonding interface of Ni/Al dissimilar joint by spot forge-welding
    Yamagishi, Hideki
    MATERIALS LETTERS, 2021, 299
  • [43] Improving joint strength of the friction stir welding of dissimilar aluminium alloy by using coating technique
    Krishna, G. Gopala
    SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2022, 47 (01):
  • [44] Study of thermal behavior and solidification characteristics during laser welding of dissimilar metals
    Li, Zhiyong
    Yu, Gang
    He, Xiuli
    Li, Shaoxia
    Li, Haiming
    Li, Qingyu
    RESULTS IN PHYSICS, 2019, 12 : 1062 - 1072
  • [45] Process study for friction stir lap welding of copper/steel dissimilar metals
    Zhou L.
    Jiang Z.
    Lei S.
    Yu M.
    Zhao H.
    Hanjie Xuebao/Transactions of the China Welding Institution, 2019, 40 (04): : 22 - 27
  • [46] Numerical study of Heat Modes of laser welding of dissimilar metals with an intermediate insert
    Isaev, V. I.
    Cherepanov, A. N.
    Shapeev, V. P.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 99 : 711 - 720
  • [47] Study of weld strength variability for capacitor discharge welding process automation
    Paul, BK
    Wilson, DD
    McDowell, E
    Benjarattananon, J
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2001, 6 (02) : 109 - 115
  • [48] Process parameters study on FSW joint of dissimilar metals for aluminum–steel
    Thaiping Chen
    Journal of Materials Science, 2009, 44 : 2573 - 2580
  • [49] Influence of pulsed current pattern on cross tension strength of spot welded joint with nugget diameter variation - Development of resistance spot welding with pulsed current pattern for ultra-high strength steel sheets -
    Taniguchi K.
    Matsuda H.
    Ikeda R.
    Yosetsu Gakkai Ronbunshu/Quarterly Journal of the Japan Welding Society, 2019, 37 (04): : 215 - 223
  • [50] Optimization of tensile strength during ultrasonic lap welding of dissimilar metals using Taguchi's philosophy
    Satpathy, Mantra Prasad
    Sahoo, Sushant Kumar
    Datta, Saurav
    DYNAMICS OF MACHINES AND MECHANISMS, INDUSTRIAL RESEARCH, 2014, 592-594 : 652 - 657
12345