Intragranular precipitation in alloy 718

被引：52
|
作者：
Miller, MK
Babu, SS
Burke, MG
机构：
[1] Oak Ridge Natl Lab, Div Met & Ceram, Microscopy & Microanalyt Sci Grp, Oak Ridge, TN 37831 USA
[2] Westinghouse Elect Corp, Pittsburgh, PA 15122 USA
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 1999年 / 270卷 / 01期
关键词：
alloy; 718; precipitates; superalloys;
D O I：
10.1016/S0921-5093(99)00235-X
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A combined energy-compensated 3-dimensional atom probe and transmission electron microscope characterization has been performed to determine the nature of the intragranular precipitates that form in Alloy 718 after various stages of a multistage heat treatment. Primary gamma " precipitates were found to form after the 870 degrees C stage. The secondary precipitates formed at lower temperatures were not found to be uniform throughout their volume, but to be divided into two distinct regions enriched in either niobium, or in aluminum and titanium, that are characteristic of the gamma " and gamma' phases, respectively. The experimentally determined partitioning data of the solute elements between the gamma matrix and the gamma " and gamma' phases was found to agree with the trends in the thermodynamic predictions. (C) 1999 Elsevier Science S.A. All rights reserved.
引用
收藏
页码：14 / 18
页数：5
相关论文
共 50 条
  • [31] Effect of second phase precipitation on limiting grain growth in alloy 718
    Muralidharan, G
    Thompson, RG
    SCRIPTA MATERIALIA, 1997, 36 (07) : 755 - 761
  • [32] Effect of residual strain on alpha Cr precipitation in Alloy 718 fasteners
    Radavich, JF
    Lindsley, B
    SUPERALLOYS 718, 625, 706 AND VARIOUS DERIVATIVES, 2001, : 411 - 420
  • [33] Precipitation of γ′ phase in δ-precipitated Alloy 718 during deformation at elevated temperatures
    Nalawade, S. A.
    Sundararaman, M.
    Singh, J. B.
    Verma, A.
    Kishore, R.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (12): : 2906 - 2909
  • [34] Effects of cold rolling on the precipitation and the morphology of δ-phase in Inconel 718 alloy
    Mei, Yunpeng
    Liu, Chenxi
    Liu, Yongchang
    Zhou, Xiaosheng
    Yu, Liming
    Li, Chong
    Ma, Zongqing
    Huang, Yuan
    JOURNAL OF MATERIALS RESEARCH, 2016, 31 (04) : 443 - 454
  • [35] MORPHOLOGY AND KINETICS OF GRAIN BOUNDARY PRECIPITATION IN ALLOY ATI 718PLUS®
    Casanova, A.
    Hardy, M.
    Rae, C. M. F.
    8TH INTERNATIONAL SYMPOSIUM ON SUPERALLOY 718 AND DERIVATIVES, 2014, : 573 - 586
  • [36] INFLUENCE OF INITIAL PRECIPITATED γ"-PHASE MICROSTRUCTURE ON δ-PHASE PRECIPITATION BEHAVIOR IN ALLOY 718
    Otake, Takuji
    Nishimoto, Takashi
    Okajima, Takuma
    JOINT EPRI - 123HIMAT INTERNATIONAL CONFERENCE ON ADVANCES IN HIGH-TEMPERATURE MATERIALS, 2019, 2019, : 738 - 749
  • [37] Effects of cold drawing ratio on δ phase precipitation behaviors of alloy 718 wire
    Dept. of Metallurgical Engineering, Pusan National University, Pusan 609-735, Korea, Republic of
    不详
    Met. Mater. Int., 4 (224-229):
  • [38] Effects of cold drawing ratio on δ phase precipitation behaviors of alloy 718 wire
    Yong-Kwon Jeong
    Chang-Yong Jo
    Yeong-Hwan Kim
    In-Bae Kim
    Metals and Materials, 1997, 3 : 224 - 229
  • [39] Precipitation and deformation behaviour of cast alloy 718 during creep and thermal exposure
    Jo, CY
    Joo, DW
    Kim, IB
    MATERIALS SCIENCE AND TECHNOLOGY, 2001, 17 (10) : 1191 - 1196
  • [40] Precipitation behavior of hot-extruded alloy 718 during isothermal treatment
    Geng, L
    Na, YS
    Park, NK
    METALS AND MATERIALS-KOREA, 1999, 5 (04): : 389 - 393
12345