Dynamic analysis of reciprocating compressor with clearance and subsidence

被引:8
|
作者
Xiao, Shungen [1 ,2 ]
Liu, Shulin [1 ]
Cheng, Shouguo [1 ,3 ]
Xue, Xiaogang [1 ]
Song, Mengmeng [2 ]
Sun, Xin [1 ]
机构
[1] Shanghai Univ, Sch Mechatron Engn & Automat, Shanghai, Peoples R China
[2] Ningde Normal Univ, Coll Informat Mech & Elect Engn, Ningde, Peoples R China
[3] Jiangyin Polytech Coll, Dept Mech & Elect Engn, Jiangsu, Peoples R China
关键词
reciprocating compressor; dynamics; clearance; subsidence; chaos; LUBRICATED REVOLUTE JOINTS; PLANAR MULTIBODY SYSTEMS; OPTIMIZATION METHOD; NONLINEAR DYNAMICS; MECHANICAL SYSTEMS; FAULT-DIAGNOSIS; SIMULATION; MODEL; PARAMETERS; LINKAGE;
D O I
10.21595/jve.2017.18771
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
In this paper, the reciprocating compressor with clearance and subsidence of the crosshead is studied, considering the varying cylinder pressure. To investigate the nonlinear dynamical behaviors of the reciprocating compressor precisely, a novel dynamic model of the reciprocating compressor of single cylinder with clearance and subsidence for the varying cylinder pressure is established based on the Lagrangian approach. It is demonstrated that different clearance sizes, subsidence sizes and crankshaft angular velocities can affect the dynamic response of the crosshead in the horizontal direction, respectively. The analysis results of dynamic response illustrate that with the increase of clearance sizes and subsidence sizes, the influence of crosshead displacement, velocity and acceleration increase, but the effect of clearance is much stronger than subsidence. Fast Fourier transformation is also applied to analyze the frequency spectrum of the system response. Moreover, the stability of the motion is studied using phase trajectories, maximum Lyapunov exponents and Poincare sections. Numerical solution results show that clearance sizes, subsidence sizes and crankshaft angular velocities change the dynamical behavior of the system. Through calculation of the maximum Lyapunov exponents and Poincare portraits, the results reveal that the reciprocating compressor system is characterized by chaotic behavior with the faults of clearance and subsidence. Furthermore, with the increase of the clearance sizes and the crankshaft angular velocities, the shapes of chaotic phase trajectories have changed greatly, and varied inconspicuously with the increase of subsidence sizes in reciprocating compressor system.
引用
收藏
页码:5061 / 5085
页数:25
相关论文
共 50 条
  • [11] Dynamic simulation and stress analysis for reciprocating compressor crankshaft
    Yu, Bin-yan
    Feng, Quan-ke
    Yu, Xiao-ling
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2013, 227 (C4) : 845 - 851
  • [12] Nonlinear dynamic response of reciprocating compressor system with rub-impact fault caused by subsidence
    Xiao, Shungen
    Liu, Shulin
    Jiang, Feng
    Song, Mengmeng
    Cheng, Shouguo
    [J]. JOURNAL OF VIBRATION AND CONTROL, 2019, 25 (11) : 1737 - 1751
  • [13] Dynamic analysis of valve with stepless capacity control for reciprocating compressor
    State Key Laboratory for Compressor Technology, Hefei General Machinery Institute, Hefei 230031, China
    [J]. Jixie Gongcheng Xuebao, 4 (136-141): : 136 - 141
  • [14] DYNAMIC ANALYSIS OF A SMALL RECIPROCATING COMPRESSOR V. LEAKAGE EFFECT ON INDICATOR DIAGRAMS WHEN RECIPROCATING COMPRESSOR IS STOPPED.
    Imasu, Kenichiro
    Imaichi, Kensaku
    Ishii, Noriaki
    Muramatsu, Shigeru
    [J]. 1978, 24 (05): : 789 - 795
  • [15] Research of Dynamic Performance of Reciprocating Compressor Valve
    Jin, Jiaqi
    Sui, Guoliang
    Shen, Deying
    [J]. ADVANCED DESIGNS AND RESEARCHES FOR MANUFACTURING, PTS 1-3, 2013, 605-607 : 1198 - +
  • [16] Dynamic behavior analysis of a reciprocating mechanism with clearance considering parameter uncertainty
    Luo, Shaomin
    Zou, Yan
    Xu, Cheng
    Li, Juan
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2020, 234 (06) : 1182 - 1195
  • [17] Analysis of Clearance Volume's Influence on Expansion Process of Reciprocating Compressor based on Matlab/Simulink
    Wang, Jixiang
    Su, Yongsheng
    [J]. PROCEEDINGS OF THE 2015 4TH INTERNATIONAL CONFERENCE ON COMPUTER, MECHATRONICS, CONTROL AND ELECTRONIC ENGINEERING (ICCMCEE 2015), 2015, 37 : 1483 - 1486
  • [18] Testing and analysis of the dynamic parameters of 3D reciprocating compressor foundation
    Wan Xinlin
    Zhang Su
    [J]. PROGRESS IN INDUSTRIAL AND CIVIL ENGINEERING, PTS. 1-5, 2012, 204-208 : 4400 - 4405
  • [19] Analysis of oil pumping in a reciprocating compressor
    Luckmann, Antonio J.
    Alves, Marcus Vinicius C.
    Barbosa, Jader R., Jr.
    [J]. APPLIED THERMAL ENGINEERING, 2009, 29 (14-15) : 3118 - 3123
  • [20] Failure analysis of reciprocating compressor crankshafts
    Becerra, J. A.
    Jimenez, F. J.
    Torres, M.
    Sanchez, D. T.
    Carvajal, E.
    [J]. ENGINEERING FAILURE ANALYSIS, 2011, 18 (02) : 735 - 746