Analysis of the hard turning of AISI H13 steel with ceramic tools based on tool geometry: surface roughness, tool wear and their relation

被引：31

作者：

Ferreira, R. ^{[1
]}

Rehor, Jan ^{[2
]}

Lauro, Carlos H. ^{[1
]}

Carou, D. ^{[1
]}

Davim, J. P. ^{[1
]}

机构：

[1] Univ Aveiro, Dept Mech Engn, Campus Santiago, P-3810193 Aveiro, Portugal

[2] Univ West Bohemia, Reg Technol Inst, Plzen 30100, Czech Republic

来源：

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING | 2016年 / 38卷 / 08期

关键词：

AISI H13 steel; Ceramic tools; Flank wear; Surface roughness; Wiper; CUTTING FORCE COMPONENTS; ALLOY-STEEL; WIPER; FINISH; OPTIMIZATION; PERFORMANCE; MACHINABILITY; INSERTS; D2; PARAMETERS;

D O I：

10.1007/s40430-016-0504-z

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Nowadays, hard turning is one of the most important processes for both industry and researchers to substitute traditional grinding operations. The present study shows an experimental investigation on the turning of AISI H13 steel with ceramic tools: conventional and wiper. Wiper geometry has as main objective obtained a smoother surface after the cutting process. Turning tests were performed to evaluate the evolution of the surface roughness and tool wear; and the influence of the flank wear on the surface roughness. A slightly better performance of wiper tools was observed for the flank wear, while no clear trend was observed when analysing the surface roughness. In most of the cases, wiper tools provided better surface roughness than conventional tools but not for all the cases. In addition, the difference in the obtained results varied widely depending on the machining length. Finally, no clear relation was found between the flank wear and the surface roughness.

引用

页码：2413 / 2420

页数：8

共 50 条

[31] Analysis and prediction of tool wear, surface roughness and cutting forces in hard turning with CBN tool
Khamel, Samir
Ouelaa, Nouredine
Bouacha, Khaider
[J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2012, 26 (11) : 3605 - 3616
[32] Wear mechanisms and microstructure of pulsed plasma nitrided AISI H13 tool steel
Leite, M. V.
Figueroa, C. A.
Gallo, S. Corujeira
Rovani, A. C.
Basso, R. L. O.
Mei, P. R.
Baumvol, I. J. R.
Sinatora, A.
[J]. WEAR, 2010, 269 (5-6) : 466 - 472
[33] Effects of conventional heat treatment on wear resistance of AISI H13 tool steel
Bahrami, A
Anijdan, SHM
Golozar, MA
Shamanian, M
Varahram, N
[J]. WEAR, 2005, 258 (5-6) : 846 - 851
[34] Tool wear in high-speed face milling of AISI H13 steel
Cui, Xiaobin
Zhao, Jun
Tian, Xianhua
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2012, 226 (A10) : 1684 - 1693
[35] Influence of heat treatments on microstructure and wear behavior of AISI H13 tool steel
Ozer, Melika
[J]. KOVOVE MATERIALY-METALLIC MATERIALS, 2022, 60 (06): : 387 - 396
[36] Microstructure and wear behaviour of pulsed plasma nitrided AISI H13 tool steel
Das, K.
Joseph, A.
Ghosh, M.
Mukherjee, S.
[J]. CANADIAN METALLURGICAL QUARTERLY, 2016, 55 (04) : 402 - 408
[37] FLOW STRESS MODEL FOR HARD MACHINING OF AISI H13 WORK TOOL STEEL
R. Shivpuri
[J]. Acta Metallurgica Sinica(English Letters), 2005, (06) : 741 - 748
[38] Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts
Sudhansu Ranjan Das
Debabrata Dhupal
Amaresh Kumar
[J]. Journal of Mechanical Science and Technology, 2015, 29 : 4329 - 4340
[39] Prediction of cutting tool vibration and surface roughness in hard turning of AISI52100 steel
Ambhore, Nitin
Kamble, Dinesh
Chinchanikar, Satish
[J]. 14TH INTERNATIONAL CONFERENCE ON VIBRATION ENGINEERING AND TECHNOLOGY OF MACHINERY (VETOMAC XIV), 2018, 211
[40] Study of surface roughness and flank wear in hard turning of AISI 4140 steel with coated ceramic inserts
Das, Sudhansu Ranjan
Dhupal, Debabrata
Kumar, Amaresh
[J]. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2015, 29 (10) : 4329 - 4340

← 1 2 3 4 5 →