Design of biped hip simulator using SolidWorks

被引：0
|
作者：
Zainudin, M. R. [1 ]
Yahya, A. [2 ]
Fazli, M. I. M. [1 ]
Syahrom, A. [2 ]
Harun, F. K. C. [2 ]
Nazarudin, M. S. [1 ]
机构：
[1] Univ Teknol Malaysia, Fac Elect Engn, Skudai 81310, Johor Bahru, Malaysia
[2] Univ Teknol Malaysia, Fac Biosci & Med Engn, Skudai 81310, Johor Bahru, Malaysia
来源：
INTERNATIONAL CONFERENCE ON APPLICATIONS AND DESIGN IN MECHANICAL ENGINEERING (ICADME 2017) | 2017年 / 908卷
关键词：
WEAR;
D O I：
10.1088/1742-6596/908/1/012060
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The increasing number of people who underwent both hip implant surgery based on World Health Organization (WHO) has received massive attention from researchers lately to develop various types of hip simulators in order to test the hip implant. Various number of hip simulator have been developed with different functions and capabilities. This paper presents the design development of biped hip simulator using SolidWorks software by taking into consideration some improvement and modifications. The finite element method is used to test the design whether it is safe to be used or not. The biped hip simulator has been successfully designed and ready to be fabricated as the endurance testing shown a positive results. The von Mises stress induced in the material is an alloy steel which is 2,975,862.3 N/ m(2) lower than the yield strength. Thus, the design is safe to be used as it obey the safety criterion.
引用
收藏
页数：6
相关论文
共 50 条
  • [1] Design of a Dynamic Simulator for a Biped Robot
    Bravo M, Diego A.
    Rengifo Rodas, Carlos F.
    MODELLING AND SIMULATION IN ENGINEERING, 2021, 2021
  • [2] Discussion on the design of a hip joint simulator
    Viceconti, M
    Cavallotti, G
    Andrisano, AO
    Toni, A
    MEDICAL ENGINEERING & PHYSICS, 1996, 18 (03) : 234 - 240
  • [3] Development of a biped humanoid simulator
    Huang, Q
    Nakamura, Y
    Arai, H
    Tanie, K
    2000 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS 2000), VOLS 1-3, PROCEEDINGS, 2000, : 1936 - 1942
  • [4] Design of a 3 DOFs parallel actuated mechanism for a biped hip joint
    Sellaouti, R
    Konno, A
    Ouezdou, FB
    2002 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS I-IV, PROCEEDINGS, 2002, : 1161 - 1166
  • [5] design optimization using MATLAB® and SOLIDWORKS®
    Patterson, Albert E.
    Peddada, Satya R. T.
    JOURNAL OF ENGINEERING DESIGN, 2022, 33 (07) : 517 - 521
  • [6] Aspects of designing of hip endoprostheses using biped robots kinematics
    Brisan, C
    Bara, M
    Stan, S
    CLIMBING AND WALKING ROBOTS: AND THEIR SUPPORTING TECHNOLOGIES, 2003, : 61 - 68
  • [7] Design and evaluation of a hip prosthesis simulator: A technical note
    Fanous, Amir
    Botros, Michael
    Gholizadeh, Hossein
    Baddour, Natalie
    Lemaire, Edward D.
    PROSTHETICS AND ORTHOTICS INTERNATIONAL, 2023, 47 (04) : 443 - 446
  • [8] Design of a Hip Joint Simulator According to the ISO 14242
    Galanis, Nikolaos I.
    Manolakos, Dimitrios E.
    WORLD CONGRESS ON ENGINEERING, WCE 2011, VOL III, 2011, : 2088 - 2093
  • [9] CHOICE OF A RATIONAL HIP JOINT WEAR SIMULATOR DESIGN
    Pakhaliuk, Volodymyr
    Pashkov, Yevgen
    Desyatov, Ivan
    Manchuk, Vitaly
    ANNALS OF DAAAM FOR 2009 & PROCEEDINGS OF THE 20TH INTERNATIONAL DAAAM SYMPOSIUM, 2009, 20 : 1559 - 1560
  • [10] An Exact Dynamic Model for the Thomas-K Biped Robot: New Simulator Design
    Sariyildiz, Emre
    Temeltas, Hakan
    2014 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION (IEEE ICMA 2014), 2014, : 2066 - 2071
12345