EXPERIMENTAL DAMPING OF A HEAT EXCHANGE TUBE WITH A LARGE NUMBER OF SUPPORTS IN AIR AND WATER

被引：0

作者：

Park, Tae-Jung ^{[1
]}

Ha, Chang-Hoon ^{[1
]}

Cho, Min-Ki ^{[1
]}

Kang, Heung Seok ^{[2
]}

Lee, Kang Hee ^{[2
]}

机构：

[1] Doosan Heavy Ind & Construct Co, Chang Won, South Korea

[2] KAERI, Daejeon, South Korea

来源：

PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2017, VOL 4 | 2017年

关键词：

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The flow induced vibration occurs frequently in a steam generator in the nuclear power plant. The large-scale steam generator has a large number of tube supports whose cell has rhombus-type shape, and there is a tiny clearance between tube and its support grid. The damping is very complex because of non-linearity and randomness. The experiment for damping was performed to investigate it with a number of 13 support spans both in air and water environment. The lower part of multi-span fixture was excited by root-mean-square random force with the range of 1 similar to 10 newton to get the frequency response function. The half-power bandwidth method was applied to obtain the damping ratio. The sensitivity of a number of spans was investigated in the range of 9 similar to 13. In addition, the damping was reviewed from a comparison with Pettigrew [1 similar to 4] and ASME B&PV Code [5].

引用

页数：7

共 50 条

[1] AN EXPERIMENTAL STUDY ON THE DAMPING OF A STEAM GENERATOR TUBE WITH GAP SUPPORTS IN AIR AND WATER
Kang, Heung Seok
Lee, Kang Hee
Shin, Chang Whan
Ha, Chang Hoon
Park, Tae Jeung
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 4, 2017,
[2] NUMERICAL INVESTIGATION ON AIR SIDE PERFORMANCE OF FIN-AND-TUBE HEAT EXCHANGERS WITH LARGE DIAMETER TUBES AND LARGE NUMBER OF TUBE ROWS
Zhou, Feng
Geb, David
Catton, Ivan
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2011, VOL 1, 2012, : 805 - 813
[3] Experimental study of heat transfer and pressure drop characteristics of air/water and air-steam/water heat exchange in a polymer compact heat exchanger
Cheng, LX
Van der Geld, CWM
HEAT TRANSFER ENGINEERING, 2005, 26 (02) : 18 - 27
[4] Fin Pattern Effects on Air-Side Heat Transfer and Friction Characteristics of Fin-and-Tube Heat Exchangers with Large Number of Large-Diameter Tube Rows
Tang, Ling-Hong
Min, Zeng
Xie, Gong-Nan
Wang, Qiu-Wang
HEAT TRANSFER ENGINEERING, 2009, 30 (03) : 171 - 180
[5] EXPERIMENTAL DETERMINATION OF THE DAMPING OF PULSATING AIR BUBBLES IN WATER
EXNER, ML
HAMPE, W
ACUSTICA, 1953, 3 (02): : 67 - 72
[6] AN INVESTIGATION OF THE HEAT-EXCHANGE CONDITIONS IN WATER AND WATER AIR QUENCHING APPLICABLE TO HARDENING OF LARGE ROTORS
LOSHKAREV, VE
MUSHEGYAN, LE
PASKAR, BL
METAL SCIENCE AND HEAT TREATMENT, 1989, 31 (5-6) : 395 - 399
[7] Water-to-water heat transfer in tube-tube heat exchanger: Experimental and analytical study
Rane, MV
Tandale, MS
APPLIED THERMAL ENGINEERING, 2005, 25 (17-18) : 2715 - 2729
[8] Parametric study and multiple correlations on air-side heat transfer and friction characteristics of fin-and-tube heat exchangers with large number of large-diameter tube rows
Xie, Gongnan
Wang, Qiuwang
Sunden, Bengt
APPLIED THERMAL ENGINEERING, 2009, 29 (01) : 1 - 16
[9] Simulation of heat exchange in large air cooled condensers
van Staden, MP
Pretorius, L
Meyer, JP
HEAT TRANSFER 1998, VOL 6: GENERAL PAPERS, 1998, : 155 - 160
[10] Investigation of the heat-exchange conditions in water and water-air quenching applicable to hardening of large rotors
Loshkarev, V.E.
Mushegyan, L.E.
Paskar', B.L.
Metal Science and Heat Treatment, 1989, 31 (06) : 395 - 399

← 1 2 3 4 5 →